Loading...
Data Sheets Community Center GLOBAL SECURITY 3212 Main Street Vancouver, WA 98663 global4security.com 360.693.1900 Reference: Fire Alarm: new fire communicator Yelm Community Center 301 2nd Street SE Yelm, WA 98597 Device Data Sheets 2023 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. ©2011 by Honeywell International Inc. All rights reserved.www.gamewell-fci.com 9020-0466 Rev. J page 1 of 3 7100 Series Compact Analog Addressable Fire Alarm Control PanelDescription The Gamewell-FCI 7100 Series fire alarm control panel is a multi processor-based, analog addressable system. The control panel is a compact, yet expandable, platform. Intended for commercial, industrial and institutional instal- lations, the 7100 Series is ideal for life safety and property protection fire alarm applications. The basic 7100 Series control panel provides one (1) or two (2), analog addressable Signaling Line Circuits (SLCs). Each SLC supports up to ninety-nine (99) analog address- able sensors, as well as up to ninety-eight (98) address- able monitor modules and/or control points. With 197 addresses available on the 7100-1 and 394 addresses available on the 7100-2. The 7100 uses an advanced pro- tocol that ensures an almost instant response to events while at the same time suppressing nuisance alarms. The system may be programmed with either the Windows®-based Field Configuration Program (FCP-7100) or configured through a comprehensive set of intuitive, secure password protected front-panel programming options. This important feature allows the system to quickly adapt to any future requirements due to changes in occu- pancies, building remodels, or other contingencies. The sophisticated circuitry and powerful analog software enables the 7100 Series fire alarm control panel to read the specific sensitivity level of each sensor and compensate for changes due to age, dust accumulation or other environ- mental factors. The 7100 incorporates the Gamewell-FCI Listed Integrated Sensitivity Testing (LIST) which meets NFPA 72 sensitivity testing and maintenance requirements. The LIST testing allows substantial savings in both mainte- nance and service while eliminating nuisance alarms. The Model 7100-1D and 2D features an integral Digital Alarm Communicator Transmitter (DACT) with all popular transmission formats and a 16-digit telephone number field. It is 8-digit Carrier Information Code (CIC) compliant and also prevents “dialer-runaway” in the event of intermit- tent system faults. The 7100-1D and 2D are UL Listed for Microsoft® Word® is a registered trademark of Microsoft® Corporation. Features • IBC Seismic Certified • Listed per ANSI/UL 864 9th Edition • 120 or 240 VAC (optional) input line voltage • Front panel programming with day/night sensitivity adjustments • 80-character alpha-numeric display • One or two Style 4 (Class “B”) signaling line circuits. Style 6 (Class “A”) with optional CAOM Module • Two Style Y (Class “B”) regulated notification appliance circuits rated for 1.5 amp each. Style Z (Class “A”) with optional CAOM Module • FM/UL Listed for Pre-action/Deluge with optional MCOM Module • Periodic trouble reminder • Individual sensor drift compensation • Dual-stage maintenance alerts (“dirty” and “very dirty”) • Multilevel sensor sensitivity adjustments (front panel programmable) continued on the next page 7100 Series An ISO 9001-2000 Company SIGNALING S1869 3003549 APPROVED FM 307-99-E 307-99-E Vol. II MEA Approved 7165-1703:105 (Non-High Rise) 7270-1703:117 (High Rise) 7300-0694: 231 (LCD-7100) 7300-0694: 241 (LCDM-7100) Reference Certificate of Compliance VMA-45894-01C GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9020-0466 Rev. J page 2 of 3 www.gamewell-fci.com Description (Continued) Remote Station, Proprietary, and Central Station fire alarm systems. It allows ample space for wiring and room for bat- teries up to 12 A/H capacity. •Features (Continued) • Alarm verification per individual sensor • Positive alarm sequence for sensors or monitor modules • Four levels of system access using six (6), digit pass- words with up to five (5), user passwords per Level • Duplicate and extra address indications • March time (60 or 120 BPM)/temporal pattern/coded fours/California Code/user-defined zone coding • Cross zoning • System configuration programming and 280 event log stored in non-volatile memory • Fan restart with sequential restart delay • Upload/download of panel configuration between panel and FCP-7100 program (password protected feature) • Up to sixty-four (64), 7100 panels in the E3 Broadband network with an optional INI-7100 Module Optional Accessories LCD-7100 The LCD-7100 remote serial display offers an 80-character alphanumeric readout for the remote display of all system events. It duplicates all the information on the 7100 Series panel display and provides key switch protected functions such as System Reset, Alarm Acknowledge, Trouble Acknowledge, Signal Silence, and Drill Test. LEDs on the LCD-7100 indicate Alarm, Supervisory, Sys- tem Trouble, Power Fault, Systems Silenced, NAC#1, and NAC#2 Silenced conditions. The LCD-7100 can be surface or semi-flush mounted on a standard four-gang electrical box. It can be installed up to 4,000 feet (1,219 m) from the main control panel. The 7100 Series fire alarm control panel supports up to five (5), remote LCD-7100 annunciators using one pair of twisted, non-shielded 18 AWG min. wire or serial communication and uses another pair of 16 AWG min. for operating volt- age. (For additional information, refer to the LCD-7100 data sheet, Part Number: 9020-0486). RAN-7100 The RAN-7100 maintains the same character display as the 7100 Series. The RAN-7100 is mounted in a RAN2-BB backbox for surface or flush mounting retrofits. (For additional information, refer to the Gamewell Retrofit Kits Data Sheet, P/N: 9020-60678). LDM-7100 The LED Driver Module (LDM-7100) is designed to mount in a UL Listed remote annunciator and provides outputs for remote panel switches and thirty-three (33), remote LEDs. Three (3), LDM-7100 modules may be installed in a single annunciator for a total of ninety-nine (99), LEDs per annun- ciator. This combination may be repeated up to five times for a total of fifteen (15), LDM-7100 panels installed at up to five (5), different locations. Maximum distances of up to 4,000 feet (1,219 m) can be achieved using one pair of twisted, non-shielded wire for serial communication and using another pair of straight-lay wire for operating voltage. (For additional information, refer to the LDM-7100 data sheet, Part Number: 9020-0519). •CAOM The Class “A” Optional Module (CAOM) allows Style Y and Z (Class “B” and “A”) operation for both Notification Appli- ance Circuits and allows Style 4 and 6 (Class “B” and “A”) for both Signaling Line Circuits. It also provides disconnect switches for each signaling line circuit and a common dis- connect switch for both notification appliance circuits. •MCOM The Municipal Connection Option Module (MCOM) pro- vides three (3) choices of outputs. It can be configured as a Municipal Circuit (City Box) output. It may also be set to serve as a Reverse Polarity output with a nominal voltage output of 24 VDC at 0.012 amp maximum alarm and super- visory current. The MCOM’s third option provides a releas- ing solenoid output rated at: • 24 VDC nominal voltage. • 0.005 amp supervisory current. • 0.710 amp maximum alarm current. • 2 ohms maximum line resistance. PTRM The Printer Transient Module (PTRM) provides RS-232 Isolator/Transient protection for the 7100’s RS-232 port (BSM connector J2). It is used in conjunction with a serial printer applied to the RS-232 port for permanent record keeping. •INI-7100 The Intelligent Network Interface Module allows the 7100 Series fire alarm control panel to become the platform of a peer-to-peer, token ring, self-regenerative network com- prised of up to sixty-four (64), 7100 panels. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 www.gamewell-fci.com 9020-0466 Rev. J page 3 of 3 Specifications Primary Input Power 120 VAC, 50/60 Hz @ 2.0 amps. or 240 VAC, 50/60 Hz @ 1.0 amp Output Power 3.335 amps. @ 24 VDC (total) Non-resettable Power:1.0 amp max. Resettable Power:1.0 amp max. 1.0 amp max. from both circuits Two (2) Notification Appliance Circuits:1.5 amp each @ 24 VDC Current: Supervisory Alarm 7100-1 (One SLC)0.065 amp 0.085 amp 7100-1D (One SLC w/DACT) 0.075 amp 0.095 amp 7100-2 (Two SLC)0.065 amp 0.085 amp 7100-2D (Two SLC w/DACT) 0.085 amp 0.105 amp LCD-7100 0.050 amp 0.075 amp LDM-7100 0.035 amp 0.200 amp (All LEDs lit) INI-7100-UTP,-FO 0.040 amp 0.040 amp Operating Temperature:32° - 120° F (0° - 49° C) Relative Humidity:93 % (non-condensing) Battery Charger Capacity: 31 A/H (Cabinet accommodates 12 A/H size batteries) Alarm & Trouble Relay Contacts:Form “C”, 2 amps. @ 24 VDC (resistive) Ordering Information Systems Part Number Description 7100-1-PNL 7100 Addressable FACP, 1 SLC mounted in 7100-CAB enclosure, red 7100-1D-PNL 7100 Addressable FACP w/DACT, 1 SLC mounted in 7100-CAB enclosure, red Basic Kits 1100-1311 Basic System Kit, 2 SLC (BSM, Keypad Display, Transformer) 1100-1312 Basic System Kit w/DACT, 2 SLC 1100-1313 Basic System Kit, 2 SLC, 240 VAC 1100-1314 Basic System Kit w/DACT, 2 SLC, 240 VAC Cabinets 7100-CAB 7100-Slim (Narrow Enclosure, red) 14.09” W x 20.1” H x 4.55” D (35.8 W x 54.61 H x 11.55 D cm) Enclosure 1100-0480 Enclosure, E3 Series Broadband, black Enclosure, 1100-0481 E3 Series Broadband, red Dimensions:19 3/8” H x 19 3/8” W x 4” D (49 H x 49 W x 10 D cm) Ordering Information (Continued) Optional Modules Part Number Description LCD-7100 Remote Serial Annunciator, LCD Display (80-character) Dimensions:4.25” H x 8.25” W x 1.90” (43 H x 37 W x 7.7 D cm) RAN-7100 Remote Series Annunciator, LCD Display (80-character) Dimensions:10” W x 5 1/4” H x 2 7/16” D (25 1/4 W x 13 1/3 H x 6 9/10 D cm) LDM-7100 Remote LED Driver Module Dimensions:6” W x 4.50” (15.2 x 11.4 cm) CAOM Class A Option Combination Module with disconnect switches for both signaling line circuits and notification appliance circuits MCOM Municipal Connection Option Module for local energy city box reverse polarity signaling, or releasing solenoid PTRM Printer Transient Module INI-7100-FO Intelligent Network Interface Module, Fiber-Optic INI-7100-UTP Intelligent Network Interface Module, Unshielded, Twisted-Pair Replacement Parts T-7100 Transformer, 120 VAC input (replacement) T-7100-240 Transformer, 240 VAC input (replacement) BSM-7100-1 Replacement board for 7100-1 BSM-7100-1D Replacement board for 7100-1D Seismic Battery Bracket Kits Part Number Description 90516 7100-Slim 7 A/H Seismic Battery Bracket kit E3 B-Slim 7 A/H Seismic Battery Bracket Kit 90517 7100-SLim 12 A/H Seismic Battery Bracket Kit E3 B-Slim 12 A/H Seismic Battery Bracket Kit 90518 NetSOLO 7100 7 A/H Seismic Battery Bracket Kit For additional information on the Seismic Battery Brackets, refer to the following documents: • Seismic Battery Bracket Installation Guide, P/N: 53839 • E3 Series Cabinets Data Sheet, P/N: 9020-0649 • Universal full event sole & dual path 5G LTE-M cellular &/or IP commercial fire alarm reporting from any panel brand, virtually anywhere nationwide • Code-compliant, replaces 2 POTs lines per FACP saves thousands of dollars per year over the leased landlines. • Supports 12V-24V control panels and FACPs that communicate using Contact ID and 4/2 (such as on legacy panels), as primary or backup. • Proven StarLink Reliability & Best 5G LTE-M Performance – Works where others can’t - Signal Boost™ Circuitry & unique dual-diversity twin antennas, maximizing signal acquisition and eliminating the multiphase-effect signal-clash/ drop-outs single-antenna units are prone to. • Full data Reporting to any Central Station nationwide, via choice of Verizon® or AT&T® Networks. Communicate critical life and safety alarm reports for maximum life safety & liability protection. • Easiest installation, powered by panel, NO extra power supply, NO extra conduit. (Excludes Metal Direct AC-Powered) • Labor-Saving Features Save Time & Money - Uniquely including 4 programmable EOLR zone inputs; 2 Form C Relay outputs (no extra supervision modules to buy or in- stall); plus, 2 Telephone style jacks for easy FACP-connection. Self-supervised on 4 wires. • Preactivated - No-Delay Activation Speeds installation time, even during peak periods. • LED Status /Trouble Indicators 3 Radio Status LED Indicators (visible from outside standard model housing) - Green, Signal Strength; Amber- Busy/Activation; Red-Trouble (4 additional LEDs, not visible, for network status & troubleshooting). Power LED indicator viewable on outer metal enclosure models. • Over-the-Air Upgradable Firmware for updates w/o a truck-roll. • CLSS Support UL and NFPA 72 Fire Code-Compliant, the StarLink Max Fire Series Wireless Commercial Fire Alarm Sole Path & Dual Path Communicators provide universal support for any brand 12V to 24V fire alarm control panel, reporting in Contact ID and 4/2. With broadest nationwide coverage footprint, Verizon or AT&T, using proven StarLink circuitry, they are also available in locking metal models. All provide the most economical solution for easy, versatile installation. Also regional compliances, i.e., CSFM, NYC FD, LAFD and more. Easy, Universal Installation at Every Application; Panel- Powered Technology™. StarLink Fire Communicators are easily connected to any panel or Fire Alarm Control Panel (FACP) standardly operating between 12V and 24V. Flexible in any application, StarLink Max Fire also comes in standard, or models in metal housings, with code-compliant supervision, and choice of power options, Panel-Powered Technology™ (powered by the panel), or direct-connect 120VAC models. Signal Boost circuitry & dual diversity antennas for maximum signal acquisition & null avoidance, receiving signals simultaneously on both antennas. One Model is Sole or Dual Path with Cellular + Internet Option. StarLink Fire provides full data reporting, in sole and dual path, as a primary or backup, to any central station of your choice, without requiring any special equipment on premises. The units are very easily activated, plans and options are selected, and 24/7 account management is provided all through www.napcocomnet.com. Napco StarLink Max® Fire Commercial Alarm Communicators • 5G LTE-M Sole or Dual Path Cell Commercial Fire Alarm Communicator in One • Choice of Nationwide Coverage Networks, Verizon or AT&T models • Choice of plans for every requirement: Simply select Cell or Cell/IP Service Plan and check-in period: 200 seconds, 5 minutes, 60 minutes, 6 hours or 24 hours. • Patented Signal Boost™ and Dual Diversity Antennae for maximum signal acquisition & null avoidance, receiving signals simultaneously on both antennas • Pro Cost-Saver Tradeup Program - Unsurpassed savings, for new and retrofit installations, replacing POTS, old radios, sunset networks and even new installations • Bonus: Full High-Speed Napco Panel remote up/downloading • COMPLIANCES: UL985, UL1023, UL1610, UL1076, UL864 10th Ed. California State Fire Marshal, NYC FD: (Note: Always “Consult with AHJ & Tech Docs /Model”, i.e., WI2465,WI2466.) 5G LTE-M Sole & Dual Path Cellular Commercial Fire Alarm Communicators 5G LTE-M STARLINK CELLULAR ® ORDERING INFO Model Type Model No. AT&T Model No. Verizon Standard ABS SLE-MAXAI-FIRE •SLE-MAXVI-FIRE • Locking Metal SLE-MAXAI-CFB •SLE-MAXVI-CFB • Metal w/Power Supply SLE-MAXAI-CFBPS •SLE-MAXVI-CFBPS • • Free FACP-Saver App - Smartphone Pro sales tool for calculating /demonstrating account’s cellular cost savings with dealer by number of lines & locations vs. copper POTs lines leased from phone co. FREE download on Apple Store or Google Play. StarLink Max Fire 5G LTE-M code-compliant standard or metal models on choice of Verizon or AT&T networks Manufacturer of Addressable, Conventional Fire Alarm Systems & Leading Commercial Fire Cellular Communications www.napcosecurity.com ©NAPCO, NAPCO Security Technologies Inc. (NADAQ:NSSC)