20100207 Permit Pkg 10292010City of Yelm
Community Development Department
Building Division
Phone: (360) 458-8407
Fax: (360) 458-3144
Applicant:
Name: YELM MEDICAL OFFICE BUILDING
Address: 2840 CRITES ST W
TUMWATER WA 98512
Property Information:
site Address: 201 TAHOMA BLVD SE
Permit No.: 20100207
Issue Date: 10/29/2010
(Work must be completed within 180 days)
Phone: 360-292-7850 (1
Owner: YELM MEDICAL OFFICE
BLDG. LLC
Assessor Parcel No.: 2 1 7241 30602 Subdivision:
Contractor Information
Lot:
Name: SMITH FIRE SYSTEMS Phone: 253-926-1880
Address:
1106 54TH AVE. SE
TACOMA WA 98424
Contractor License No.: SMITHFS1360T Expires: 11/02/2010
Project Information:
Project: FIRE SPRINKLER
Description of Work: PROVICENCE IMAGING TI FIRE SPRINKLER
Sq. Ft. per floor: First Heat Type (Electric, Gas, Other):
Second
Third
Garage
Basement
Fees:
Item
FIRE SPRINK
Contractor
SMITH FIRE SYSTEMS
TOTAL FEES:
Fees
$ 183.56
5 183.56
OFFICIAL USE ONLY
# Sets of Prints:
Final Inspection:
Date:
sy:
Applicant's Affidavit:
I certify that I have read and examined the information contained within the application and know the same
to be true and correct. I also certify that the proposed structure is in conformity with all applicable City of
Yelm regulations including those governing zoning and land subdivision, and in addition, all covenants,
easements and restrictions of record. If applying as a contractor, I further certify that I am currently
~i~~ of Y~1«
~'~F,G:~ 458-840L
FtEG'~: ~?~('4:~S1G 1Ci?'~'~~1.0 ~:D~ F;~
QPER: ro TERi~: ~Oi
REF'S: ?B~GI
TR~i~: ;~.~.000~? £~I IILI~I~IG F'E~~IT
~OlOQ?07 i8:~,.5~L~CF;
YEEi~ MEDIrAt nFFICE BIJII.DI~'C
4ql TAFII~iA RLUD 5E
FIRE SPRi~i:: 183.~aE~CR
TENDERED: _le~.5~~ Ci~fCK
~i~~±i,E: il,lt~
CITY OF YELM
COMMERCIAL BUILDING PERMIT APPLICATION FORM
Project Address: dol Ta>ho,x.a_. ~\vd Ssi, t~21r. , U ~ Parcel #: at~~N i3o(poo ~.17a4 i3o5-o0, ~,1't~-N 13o(y0a
Zoning; Current Use: 54.21\ coact Proposed Use: r1r~~c~l ~o~k~c~
^ New Construction ~ Re-Model / Re-Roof /Tenant Improvement
Plumbing ~ Mechanical ,4 Fire Prevent/Suppress/Alarm Other
Project Description/Scope of Work: Wtod;.ly er~5~',na S~n~-lec s~~tP.n ~ n-c~ +e~t sta~ac°.~
Project Value: ~ LI I G3 • "O
Building Area (sq. ft) Parking Garage~1 S' Floor I~, 35 2~d Floor_~3`~ Floor~_
Building Height
Are there any environmentally sensitive areas located on the parcel? _
completed environmental checklist must accompany permit application.
If yes, a
BUILDING OWNER/TENANT NAME:pco ~ R t
ADDRESS LIIU So~~t-vl ~ v.b2c ~~ _E AIL ~ohec^~.~ake~ ~~ov~de..cc .oc`a~
CITY- ('f.~-c-t.:\:~ STATE~4 _.ZIP ~XS31 TELEPHONE (3~) '3-so- 38c~8
ARGHITECT/ENGINEER LICENSE #
ADDRESS EMAIL
CITY STATE ZIP TELEPHONE
GENERACCONTRACTOR TELEPHONE
ADDRESS EMAIL
CITY STATE ZIP FAX
CONTRACTOR'S LICENSE # EXP DATE_CITY LICENSE #
PLUMBING CONTRACTOR TELEPHONE
ADDRESS EMAIL
CITY STATE ZIP FAX
CONTRACTOR'S LICENSE # EXP DATE_CITY LICENSE #
MECHANICAL CONTRACTOR ~rn',~-In F'„csysk.~s TELEPHONE (~-ss)~-Ng-~yl
ADDRESS - +!~ EMAIL axe-lso+t+t ~' sue;-w~~;rC . ~d~
CITY ~Ta~,w~a. _STATE A ZIP ~gl/~1y FAX. (.~s3)~9~v-i~lrv
CONTRACTOR'S LICENSE # Sw~1µF5 i3woT EXP DATE CITY LICENSE #
Copy of City Mitigation documentation (TFC).
I hereby certify that the above information is correct and that the construction on, and the occupancy and the use of the
above described property will be in accordance with the laws, rules and regulations of the State of Washington and the
City of Yelm.
G~ %~ /D -/y-/a
Applicant's Signature Date
Owner /Contractor /Owner's Agent /Contractor's Agent /Tenant (Please circle one.)
All permits are non-transferable and will expire if work authorized by such permit is not begun
within 180 days of issuance, or if work is suspended or abandoned for a period of 180 days
105 Yelm Avenue
PD $ox 479
Yelm, WA 98597
(360) 458-3144 FAX
www.ci.yelm.wa.us
FILE C':'
Bulletin 014 Rev. D
~~';~~'~ Model F1 FR Series
Quick Response
Standard Spray
Model F1 FR 56 Sprinkler Types
Standard Upright
Standard Pendent
Conventional
Vertical Sidewall
Horizontal Sidewall
Model F1 FR 56 Recessed Sprinkler Types
Standard Pendent/F1/F21FP
Horizontal Sidewall
Model F1 FR 56 Concealed Sprinkler Types
Standard Pendent
Listing & Approvals
1. Underwriters Laboratories Inc. and Certified for
Canada (cULus).
2. Factory Mutual Approvals (FM)
3. Loss Prevention Councii (LPCB, Uf<)
4. VdS Schadenverhutung GmbH
UL Listing Category
Sprinklers, Automatic & Open (VNIV)
Quick Response Sprinkler
Product Description
Reliable Models F1FR Series Sprinklers are quick re-
sponse sprinklers which combine the durability of a stan-
dard sprinkler with the attractive low profile of a decorative
sprinkler.
The Models F1FR Series Recessed automatic sprinklers
utilize a 3,0 mm frangible glass bulb. These sprinklers have
demonstrated response times in laboratory tests which
are five to ten times faster than standard response sprin-
klers. This quick response enables the Model F1FR Series
sprinklers to apply water to a fire much faster than standard
sprinklers of the same temperature rating.
The glass bulb consists of an accurately controlled amount
of special fluid hermetically sealed inside a precisely manu-
factured glass capsule, This glass bulb is specially con-
structed to provide fast thermal response.
At normal temperatures, the glass bulb contains the fluid
in both the liquid and vapor phases. The vapor phase can
be seen as a small bubble. As heat is applied, the liquid
expands, forcing the bubble smaller and smaller as the liq-
uid pressure increases. Continued heating forces the liquid
to push out against the bulb, causing the glass to shatter,
opening the waterway and allowing the deflector to distrib-
ute the discharging water.
,.,~,_
~:
•-„~ n
`~~"_
~ ~~~~v
II
Vertical Sidewall
Conventional
Horizontal Sidewall Recessed
Pendent/F1/F2
~:
,~~ ! ~~
', ,~
Recessed Recessed
Horizontal Sidewall Pendent/FP
Application
Quick response sprinklers are used in fixed fire protec-
tion systems: Wet, Dry, Deluge or Preaction. Care must be
exercised that the orifice size, temperature rating, deflec-
tor style and sprinkler type are in accordance with the lat-
est published standards of the National Fire Protection As-
sociation or the approving Authority Having Jurisdiction.
Quick response sprinklers are intended for installation as
specified in NFPA 13. Quick response sprinklers and stan-
dard response sprinklers should not be intermixed.
0
0
The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523
Model F1 FR Quick Response Upright, Pendent & Conventional Sprinklers
Installation Wrench: Model D Sprinkler Wrench
Installation Data:
Nominal Thread Nominal K Factor
Orifice Size -!
-_~ ___ _ US Metric
Standard-Upright (SSU) and pend
''/z" (15mm) '/z" NPT(R'/z) 5.6 80
Conventional-Install in
15mm"' ''/a" NPT(F~'/z) 5-6 ~80
"' cULus Listed corrosion resistant (Polyester coated) sprinkler
'7' Polyester coaled FM approved sprinkler.
.,.
'~ '#~
Upright
Pendent
Model F1 FR 56 Quick Response Recessed Pendent Sprinkler
Installation Wrench: Model GFR2 Sprinkler Wrench
Installation Data: _ _
Nominal Thread K Factor Sprinkler Sprinkler Identification Number
._-
Orifice ~ Size US ~ Metric Height (SIN)
- - ___
''/z" (15mm) '/z" NPT(R'/z) 5.6 80 2.25" (57mm) RA1414
"' Reter to escutcheon data table for approvals and dimensions.
1 I/1' HOLE WA-
f571mmJ
1 IS/16" 0u
[.a.zmm)
~-
~
L __
=-a
r2___T=-~11
'
"
TURN COLIAR J
~ - t
X l/7
RCOUCER
UNNL IILNf
AGAfNSI $PRINKL ER
WAENLN BOSS ~
\ 7
I
~
1
Y C
-
CACC OF nFNNO /0111
AOJUSIMENIIII ~S ~ C~ F2ML ~OIMENSION
-~- I/8-
(3.7m.~J !U
A'
1 17/71. ON. OI~FL01
j77.1mmJ
(If ItEFFR !O FI h FT CSLUICNFON LIOIA /ABLE FOR APPROVALS AN0 OfNEN90NS.
Model F1FR 56/F1 or F2
Sprinkler Identification Number
Sprinkler Approval (SIN)
Height Organization -
Uoriaht ~endent
ent Deflectors Marked to Indicate Position
2.25" (57mm) 1, 2, 3, 4~ RA1425'~'
Upright or Pendent Position
57mm 3.4
2.
RA1414''"T
RA 1475
Conventional
HOLE IN Cf1L1NC
1 5/16" DIA. (58.7mmJ
CUP
r - _~
I I
' r
~ /
\ /
7" x 1/2~ REDUCER
FACE OF F/TTlNC
TO FACE OF CFIL INC,
O1MfNSlONr1f
(i~
AL7JUSTMENT ('1
A
OISFWI
(If REFER TO FP ESCUTCHEON L74TA TABLE FOR APPROVALS ANO O/MfNSXNJS.
Model F1FR 56/FP
Model F1 FR Quick Response Vertical Sidewall Sprinkler
Installation Wrench: Model D Sprinkler Wrench
Installation Position: Upright or Pendent
Approval Type: Light Hazard Occupancy
Installation Data:
in
l
N Nominal K Factor Sprinkler Approval Sprinkler
om
a
Orifice Thread Size
US
Metric Hei ht
g Or anizations
g Identification
Numbers (SIN)
''/z" (15mm) ''/z" NPT (R1/2) 5.6 8.0 2.25" (57mm) 1,2,3,4
RA1485
15mm '/z" NPT (R1/2) 5.6 8.0 2.25" (57mm) 411
1iLPC Approval is for pendent position only.
Vertical Sidewall
Sprinkler Type Deflector to Ceiling Distance
(Min. -Max.)
Upright 4" {102mm) - 12" (305mm}
Pendent 4" (102mm) - 12" (305mm)
Model F1 FR Quick Response Horizontal Sidewall Sprinkler
Deflector: HSW
Installation Wrench: Model D Sprinkler Wrench
Installation Data: Horizontal Sidewall
~ Sprinkler Approval Organizations
i Nominal K Factor Height and Type of Approval Sprinkler
tific
Id
ti
Nominal Orifice Thread Size en
a
on
~~ US Metric
Light Hazard Ordinary Numbers SIN
( ~
Hazard
'/z" (15mm) ''/z" NPT (R1/2) 5.6 80 2.63" (67mm) 1,2 1 RA1435
~~ f ,,
"*1
Horizontal Sidewall
FACE OF F/TTY
TO FACE OF CE
DIMENSION
2 1/4" HOLE OIA.
[57.2mm)
7" X i/2" REDUCER
1 i/4" M/N.
[J 1.8mm]
(3.2mmJ [701.6mm-752.4mmJ
^\, CEILING TO
DEFLECTOR
plA.
TURN COLLAR UNTIL ~
TIGHT AGAINST SPRINKLER
WRENCH BOSS.
O/JFG03
1
AOJUSTMEN7( )
(1) REFER TO ESCUTCHEON DATA TABLE FOR APPROVALS ANO DIMENSIONS.
3.
Model F1 FR quick Response Concealed Pendent Sprinklers
Installation Wrench: Model RC1 Sprinkler Wrench
Technical Data:
-_ -
i
l K" Factor
T
Thread ~
l ~' Temp r
Rating -
Bulb
I~
Sprinkler
Nom
na
Orifice - -
US ,Metric Mode
Size I
Sprinkler pent
'
Cover ~ Temp Colar Approvals I Identification
~', Number(SIN)
Yz" (15mm) 5.6 80 '/z" NPT F1FR
., - - 135°F/57°C
- 135°F/57°Ct 100°F138°C Orange
_ _ . --
- - ---,- 1, 2 RA1414
- --_ _.. _
-___
''/z" { 15mm)
---__-_ -----
5.6 80
_ .._ - ''/z" NPT I F 1 FR
--- + __ - 155°F168°C
--_ -...__T T
135°F/57°C ~ 100°F/38°C ' Red
-~- 1, 2, 4`'' RA 1414
--
'/z" (15mm) 5.6 I 80 '/z" NPT ~ FiFR 175°F/79°C 165°F/74°C 100°FJ38°C ! Yellow 1, 2 RA1414
'/z" (15mm) 5.6 80 '/z" NPT ' F1FR 200°F/93°C 165°F/74°C 100°F/38°C Green 1, 2 RA1414
'" For vdS only = 155°F/68°C Norbulb and 112" 112,7mm] adjustment.
i" r 1/7" REDUCING
TEE OR ELBO1WAf}~~ _ _ _ _
~ ~ ~~ 7 5/8" DIA.
2 5/16" D1A - I HOLE /N Cfll WG
CUP ~ ~ / 2^ MAX,
,~ FACE OF FITTING
~ TO FACf OF CfILlNC
i T~;~„~~i'/~ DIMENSION
CEILING
S I -
7/2" MAX. 15/76"
COVER ADJUSTMENT I
covfR PLATE - -~
ASSEMBLr ,3 5/76" DrA.
SPRINKLER
1 /2" ADJUSTMENT °~FC°i
Figure 1
f" . 1/7" REDUCING
TEE OR ELBOW
~-~ r--J 7 5/B,. DIA.
7 5/16" D1A - ROLE /N CEILING
I
CUP
' ~
--
1 I/Z" MAX.
~.~
~~//
:::
%-1
I
T FACE OF FITTING
TD FACf OF CE/LfNG
-;~
-;;
L
1..
-"~" I ,
,
;'~ DIMENSION
CEILING T - 1
"
'J •,
5/16" MAX. J I 3/4
COVER A0./USTMENT I
COVER PLATE - -J I
( ASSEMBLY 3 5/16" D/A.
~ SPRINKLER -J
5/16" ADJUSTMENT o.MOm
Figure 2
Installation Aid
A protective cap is included for use during installation.
Im op rtant: The F1 FR 56 Sprinkler with Model CCP cover
plate is not an FM Approved combination.
Installation
Quick response sprinklers are intended for installation
as specified in NFPA 13, Quick response sprinklers and
standard response sprinklers should not be intermixed.
The Model F1 FR 56 Recessed Quick Response Sprin-
klers are to be installed as shown. The Model F1 or F2 Es-
cutcheons illustrated are the only recessed escutcheons
to be used with the Modei F1FR 56 Sprinklers. The use
of any other recessed escutcheon will void all approvals
and negate all warranties.
When installing Model F1FR 56 Sprinklers, use the
Model D Sprinkler Wrench. Use the Model GFR2 Wrench
for installing F1 FR 56 Recessed Pendent Sprinklers. Any
other type of wrench may damage these sprinklers.
NOTE: A leak tight ''/z" NPT (R1/2) sprinkler joint can
be obtained with a torque of 8-18 ft-Ibs (10,8 - 24,4 N-m).
Do not tighten sprinklers over maximum recommended
torque. It may cause leakage or impairment of the sprin-
klers.
The Model F1 FR 561 CCP Concealed Sprinkler uses the
Yz" orifice, %z" NPT (R1/2), 135°F (57°C), 155°F (68°C),
175°F (79°C) or 200°F (93°C) Model F1 FR 56 Pendent
Sprinkler with a threaded Model CCP cup which is fac-
tory attached to the sprinkler. The assembly is complet-
ed by the installation of the attractive, low profile, 135°F
(57°C) or 165°F (74°C) rated Model CCP push on cover
plate assembly. The cover plate and sprinkler cup as-
semblies are joined using a cover plate skirt with flexible
tabs for threaded engagement. A choice of two cover
plate assemblies provide either %z" (13mm) or 5/, 6" (8mm)
of cover adjustment.
Do not install these sprinklers in ceiling which have
positive pressure in the space above.
After a 2516" (67mm) diameter hole is cut in the ceil-
ing, the sprinkler is easily installed with the Model RC1
Wrench. A Teflon` based thread sealant should be
applied to the sprinkler threads only. The Model RC1
Wrench is then used to engage the sprinkler wrenching
surfaces and to install the sprinkler in the fitting. When
inserting or removing the wrench from the sprinkler/cup
assembly, care should be taken to prevent damage to
the sprinkler. DO NOT WRENCH ON ANY OTHER PART
QF THE SPRINKLER. The cover plate is then pushed
onto the cup. Final adjustment is made by hand turning
the cover plate until the skirt flange makes full contact
with the ceiling. Cover plate removal requires turning in
the counter clockwise direction.
4.
After installation, inspect all sprinklers to ensure that
there is a gap between the cover plate and ceiling and
that the four cup slots are open and free from any air flow
impediment to the space above.
Concealed cover plate/cup assemblies are listed only
for use with specific sprinklers. The use of any other con-
cealed cover plate/cup assembly with the Model F1FR
56 Pendent Sprinkler or the use of the Model CCP Con-
cealed cover plate assembly on any sprinkler with which
it is not specifically listed my prevent good fire protection
and will void all guarantees, warranties, listings and ap-
provals.
Glass bulb sprinklers have orange bulb protectors to
minimize bulb damage during shipping, handling and
installation. REMOVE THIS PROTECTION AT THE TIME
THE SPRINf(LER SYSTEM IS PLACED 1N SERVICE FOR
FIRE PROTECTION. Removal of the protectors before this
time may leave the bulb vulnerable to damage. RASCO
wrenches are designed to install sprinklers when covers
are in place. REMOVE PROTECTORS BY UNDOING THE
CLASP BY HAND. DO NOT USE TOOLS TO REMOVE
THE PROTECTORS.
Temperatur
~ Classification ~ e Ratings
Sprinkler
Tem erature _
Max. Ambient
T
Bulb Color
~-- -- _ -- __.°C-- of-- . emp.
Ordinary 57 135 100°F{38°C) Orange
Ordinary
Intermediate
Intermediate
Hi h "' 68
79
93
141 155
175
200
286
2 100°F{38°C)
150°F (66°C)
150°F (66°C)
25°F 107°C~ Red
Yellow
Green
Blue
"' Not available for recessed sprinklers.
Escutcheon Data t')
F
SwDcheon
~.A,. Face of Fitting TA
.
Approvals Adjustment
Nbdel i
Dimension Ceiling or Wall
-- - - Dimension-_-
r
3 4 Max Recess
F1 1 1'h"(381mm) ', '/,e _'sh:
,
Min Recess
- - __- '/a°(191mm)_.i (Smm-24mm)
Max Recess
F2 i
3.4
2 1 %i' (38.1 mm) '/'~;' - ''h,:"
,
,
Min Recess
i
__ 1_"_(25mm) _J_ _~5mm -_ 17mm]__
~FP PushcN Max Recessed
4
1 'hF' (t tmm) 1'/z° (38.1mm)
'
Min Recessed
_ , Threadoft ~ _ _
' 'shF. (24nxn)_ (25.~rrrnl
Wit
"'SIN: RA1435 - cULus and FM permits use with F 1 or F2 esc utcheons for light
hazard only.
Maintenance
The Models F1FR 56 and F1FR 56 Recessed Sprinklers
should be inspected quarterly and the sprinkler system
maintained in accordance with NFPA 25. Do not clean
sprinklers with soap and water, ammonia or any other
cleaning fluids. Remove dust by using a soft brush or
gentle vacuuming. Remove any sprinkler which has
been painted (other than factory applied) or damaged
in any way. A stock of spare sprinklers should be main-
tained to allow quick replacement of damaged or oper-
ated sprinklers. Prior to installation, sprinklers should be
maintained in the original cartons and packaging to mini-
mize the potential for damage to sprinklers that would
cause improper operation or non-operation.
Sprinkler Types
Standard Upright
Standard Pendent
Conventional
Recessed Pendent
Vertical Sidewall
Horizontal Sidewall
Recessed Horizontal sidewall
Concealed pendent
Finishes (')
Bronze Brass
Chrome Plated Chrome Chrome
White Polyester ;Plated White
(~natorl tausi '' White PainTari
Bright Brass "' I Bright Brass Bright Brass
Black Plated ~ Black Plated Satin
Black Paint `z' Black Paint Off White
Off White'=' ,Off White Black Paint
"'' Other finishes and colors are available on special order.
Consult the factory for details.
i2` cULus Listed only
"' 200°F (93°C) maximum.
'a' cULus listed "corrosion resistance" applies to SIN Numbers
RA1425 (Upright) and RA1414 (Pendent) in standard black or white.
'~" FM Approvals finish as "Polyester coated" applies to SIN Number
RA1414 (Pendent) in standard black or white.
Ordering Information
Specify:
1. Sprinkler Model
2. Sprinkler Type
3. Orifice Size
4. Deflector Type
5. Temperature Rating
6. Sprinkler Finish
7. Escutcheon Type
8. Escutcheon Finish (where applicable)
9. Cover plate Model
t1?. Cover plate Thread size
11. Cover plate Temperature
12. Cover plate Adjustment
13. Cover plate Finish
Note: When Model F1FR 56 Recessed sprinklers are ordered, the
sprinklers and escutcheons are packaged separately,
5.
Rel fable... For Com lete Protect I O r1
p
Reliable offers a wide selection of sprinkler components. Following are some of the many
precision-made Reliable products that guard life and property from fire around the clock.
• Automatic sprinklers
• Flush automatic sprinklers
• Recessed automatic sprinklers
• Concealed automatic sprinklers
• Adjustable automatic sprinklers
• Dry automatic sprinklers
• Intermediate level sprinklers
• Open sprinklers
• Spray nozzles
• Alarm valves
• Retarding chambers
• Dry pipe valves
• Accelerators for dry pipe valves
• Mechanical sprinkler alarms
• Electrical sprinkler alarm switches
• Water flow detectors
• Deluge valves
• Detector check valves
• Check valves
• Electrical system
• Sprinkler emergency cabinets
• Sprinkler wrenches
• Sprinkler escutcheons and guards
• Inspectors test connections
• Sight drains
• Ball drips and drum drips
• Control valve seals
• Air maintenance devices
• Air compressors
• Pressure gaugesldentification signs
• Fire department connection
The equipment presented in this bulletin is to be installed in accordance with the latest published Standards of the National Fire Protection Association, Factory
Mutual Research Corporation, or other similar organizations and also with the provisions of governmental codes or ordinances whenever applicable.
Productsmanufactured and distributed by Reliable have been protecting life and property for over 90 years, and are installed and serviced by the most highly
qualified and reputable sprinkler contractors located throughout the United States. Canada and foreign countries.
Manufactured by
_ The Reliable Automatic Sprinkler Co., Inc
(800) 431-1588 Sales Offices
{800) 848-6051 Sales Fax
(914) 829-2042 Corporate Offices
www.reliablesprinkler.com Internet Address
Recycled
Paper
Revision fines ~nd~cate updated or new data
EG Printed in U S A 02110 PM 9999970300
Sprinkler Drop
FLEXIBLE SPRINKLER DROP c ~l vs ~~
• EasyIIex Flexible Sprinkler Drop provides fast and simple APPROVED
installation.
• Improved NEW TBS Brackets assures stability in the most challenging environment.
FEATTJRES
Hoses
• Lengths: 24", 36", 48", 60", and 72"
• Sizes: 1/2" or 3/4"
Straight or 90° Outlet Nipples
• Type: Braided (UL I FM)
Upbraided (UL
Brackets
• TBS System (UL / FM): T-Bar Grid
Commercial Suspend Ceiling
• MSB System (FM): Metal
Stud/Sheetrock Suspend Ceiling
TECHNICAL DATA
TE
• Temperature: 225°F
• Pressure: 175 psi
• Connection: Inlet: 1" NPT
Outlet: 1/2" or 3/4" NPT
• Maximum Bend Radius: 4" (UL), 8" (FM)
*Do not bend within 2.52 inches from
connection nuts.
• Maximum Number of Bend: Refer to
Fiction Loss Data
• K-Factor: Z/2" Outlet: 5.6 gpm
3/4" Outlet: 8.0 gpm
N
PRODUCT SUBMITTAL Job Name: Job Location:
Submitted By; Date:
Approval: Date:
s5o4z Parkway Loop Un it p T:7u~ 258 z6oo / 888 577 8999
Tustin, CA 9z~8o-65zz F;7i4 z58 z6oz
www.easyftexusa.com E-mail:infoC~easyftexusa.com
EASYFLE~J~C
prinkter Drop
FRICTION LOSS DATA
Length
(Inch) Outlet
Connection Maximum Number
of 90° Bends (L]L) Equivalent Length of 1 in. Schedule 40 Pipe, ft
(FM / UL)
° 1/2" I 6.8 / 18
24
314"
1 4.7118
" 1/Z" 2 11.5 / 31
36 314" 2 10.6 / 34
„ 1/2" 3 16.7 / 48
4$ 3/4" 3 12.7 / 61
1/2" ¢ 20.6 / 60
60" 3/4„ 4 17.0 / 65
„ 1/2" 4 24.0 / 71
72 3/4" 4 19.8 / 72
* Differences of Friction Loss Data axe due to the different test methods and conditions between UL ana r~rn approval.
FM Approval: 8" Minimum Bend Radius, where C =100 / UL: 4" Minimum Bend Radius, where C = 120
APPLIANCE STANDARDS
• American Society for Testing and Methods (ASTM)
- ASTM C635 Standards Specification for the Manufacture, Performance, and Testing of Metal
Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
- ASTM C636 Standards Practice for Installation of Metal Ceiling Suspension Systems for
Acoustical Tile and Lay-in Panels
• FM Approval (F11~ - FM Class Number 1637 Approved Standard for Flexible Sprinkler Hose
with Threaded End Fittings
National Fire Protection Association (NFPA)
- NFPA 13 Standard for the Installation of Sprinkler Systems
- NFPA 13D Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings
and Manufactured Homes
- NFPA 13R Standard for the Installation of Sprinkler Systems in Residential Occupancies Up to
and Including Foux Stories in Height
• Underwritings Laboratories, Inc. (UL) - UL 2443 Standards for Flexible Sprinkler Hose with
Fittings for Fire Protection Service
MATERIAL SPECIFICATION
1. Corrugated Flexible Hose: SS 304
2. Braid: SS 304
3. Nut and Nipple: Zinc Plated Carbon Steel
4. End Brackets: Zinc Plated Carbon Steel
5. Stock Bar: Zinc Plated Carbon Steel
6. Center Bracket: Zinc Plated Carbon Steel
7. Gasket: EPDM
i5o4z Parkway Loop Unit D T:7i4 258 2600 / 888 577 $949
Tustin, CA 9z78o-b5zz F:7~ z58 z6oz
www.easyftexusa.cam E-mail:infoQeasySexusa.com