20100208 Permit Pkg 10292010City of Yelm
Community Development Department
Building Division
Phone: (360)458-8407
Fax: (360) 458-3144
Applicant:
Name: YELM MEDICAL OFFICE BUILDING
Address: 201 TAHOMA BLVD
YELM WA 98597
Property Information:
Site Address: 201 TAHOMA BLVD SE
Assessor Parcel No.:
Contractor Information:
Name: SMITH FIRE SYSTEMS
Address:
1106 54TH AVE. SE
TACOMA WA 98424
Subdivision:
Contractor License No,: SMITHFS1360T
Permit No.: 20100208
Issue Date: 10129/2010
(Work must be completed within 180 days)
Phone:
Owner: YELM MEDICAL OFFICE
BLDG, LLC
Lot:
Expires: 11/02/2010
Project Information:
Project: FIRE SPRINKLER
Description of Work: PAC LAB FIRE SPRINKLER TI
Sq. Ft. per floor: First Heat Type (Electric, Gas, Other):
Second
Third
Garage
Basement
Fees:
Item
FIRE SPRINK
Contractor
SMITH FIRE SYSTEMS
Phone: 253-926-1880
TOTAL FEES:
Applicant's Affidavit:
I certify that I have read and examined the information contained within the application and know the same
to be true and correct. I also certify that the proposed structure is in conformity with all applicable City of
Yelm regulations including those governing zoning and land subdivision, and in addition, all covenants,
easements and restrictions of record. tf applying as a contractor, t further certify that ! am currently
registered in the to of Wash'ngton.
Signature ~.d /;~~ Date /Q ~ ,~ 7 ~^ ~ v
Firm
Fees
$ 137.36
S 137.36
OFFICIAL USE ONLY
Sets of Prints:
inat tnspectton:
Date:
By: _
~i t~ of ~~1~
i3~~:} 458--840?
REC#: 0004.~80'~ 101~r~/~0~0 x:00 Ff~
OF'ER: CS TER~f~ 00?
REFS: ?9~'0?
TRA`rI: ~.~.0000 DJII_DIN,G F'ER.~ITS
YELM NEDIrN~ DFFIGF DiJILDINr
~Ol TAHO~iH R! UD SE
FIRE 5f'RNit ? ~~"r . =~E,GR
TENDERED: 1~"r.3~• GI-~Ck'
AFF~IED: 1~7.3~~-
CHANGE: __--------0,00
CITY OF YELM
COMMERCIAL BUILDING PERMIT APPLICATION FORM
Project Address: ab~ "rala~t~a 61vd 5E .Yelp, ~~ Parcel #: ~173N 13y(~oe, ~l'7ay 13asoo, ~,t7,tyl souva
Zoning; Current Use: S_ kC~~ Tact Proposed Use:~r c ~ a l o~'ce
New Construction k Re-Model / Re-Roof /Tenant Improvement
Plumbing Mechanical ~ Fire PreventlSuppress/Alarm Other
Project Description/Scope of Work: moB~~ et~is~iae, ~Pr~nklC~ s~sttnr ~ N[iJ +~e~rf S~cG
Project Value: ~ ~ ~Sr 7Lv ~ vd
Building Area (sq. ft) Parking Garage ~" 151 Floor f, 00 2"d Floor~3`d Floor
Building Height
Are there any environmentally sensitive areas located on the parcel? If yes, a
completed environmental checklist must accompany permit application.
BUILDING OWNER/TENANT NAME: Pat LRg
ADDRESS loGd Sty 3~f'"' SrTrc~ EMAIL tcftl-~-ze/ ~ pa~+./. ~o~
CITY ~,P~.Lfi.+n STATE ~fl- ZIP ~gDS7 TELEPHONE (ya.Sj a7~• - 8ly9
ARCHITECT/ENGINEER LICENSE #
ADDRESS EMAIL
CITY STATE ZIP TELEPHONE
GENERAL CONTRACTOR TELEPHONE
ADDRESS EMAIL
CITY STATE ZIP FAX
CONTRACTOR'S LICENSE # EXP DATE_CITY LICENSE #
PLUMBING CONTRACTOR TELEPHONE
ADDRESS EMAIL
CITY STATE ZIP FAX
CONTRACTOR'S LICENSE # EXP DATECITY LICENSE #
MECHANICAL CONTRACTOR Sr+%.flt Frc Sys~r~s TELEPHONE ~.zs3) otiy6 -r~47
ADDRESS //y~ Sri' eve • ~• ~ EMAIL ct/tC/sos,N ~rx~~f~. F.'.e" co~.r
CITY !`atprw~ STATE 1.1,A ZIP 'l'EyZH FAX /,~ 53S 89G- /al ~
CONTRACTOR'S LICENSE # Srn~+~rs r3coo r EXP DATE CITY LICENSE #
Copy of City Mitigation documentation (TFC).
I hereby certify that the above information is correct and that the construction on, and the occupancy and the use of the
above described property will be in accordance with the laws, rules and regulations of the State of Washington and the
City of Yelm.
G~~ /~v /o-iy-io
Applicant's Signature Date
Owner /Contractor 1 Owner's Agent /Contractor's Agent I Tenant (Please circle one.)
All permits are non-transferable and will expire if work authorized by such permit is not begun
within 180 days of issuance, or if work is suspended or abandoned for a period of 180 days
105 Yelm Avenue West (360) 458-3835
PO Box 479 (360) 458-3744 FAX
Yelm, WA 98597 u~u~u~.ci.yelm.ma.us
~~~ ki' ! ~~~~
Bulletin 014 Rev. D
o Model Fi FR Series
~~''~~'~ Gluick Response
Standard Spray
Model F1 FR 56 Sprinkler Types
Standard Upright
Standard Pendent
Conventional
Vertical Sidewall
Horizontal Sidewall
Model F~ FR 5S Recessed Sprinkler Types
Standard Pendent/F1/F2/FP
Horizontal Sidewall
Model F1 FR 56 Concealed Sprinkler Types
Standard Pendent
Listing & Approvals
1. Underwriters Laboratories Inc. and Certified for
Canada (cULusj.
2. Factory Mutual Approvals (FM)
3. Loss Prevention Council (LPCB, UK)
4. VdS Schadenverhutung GmbH
UL Listing Category
Sprinklers, Automatic & Open (VNIV)
Quick Response Sprinkler
Product Description
Reliable Models F1FR Series Sprinklers are quick re-
sponse sprinklers which combine the durability of a stan-
dard sprinkler with the attractive low profile of a decorative
sprinkler.
The Models F1FR Series Recessed automatic sprinklers
utilize a 3.0 mm frangible glass bulb. These sprinklers have
demonstrated response times in laboratory tests which
are five fo ten times faster than standard response sprin-
klers. This quick response enables the Model F1FR Series
sprinklers to apply water to a fire much faster than standard
sprinklers of the same temperature rating.
The glass bulb consists of an accurately controlled amount
of special fluid hermetically sealed inside a precisely manu-
factured glass capsule. This glass bulb is specially con-
structed to provide fast thermal response.
At normal temperatures, the glass bulb contains the fluid
in both the liquid and vapor phases. The vapor phase can
be seen as a small bubble. As heat is applied, the liquid
expands, forcing the bubble smaller and smaller as the liq-
uid pressure increases. Continued heating forces the liquid
to push out against the bulb, causing the glass to shatter,
opening the waterway and allowing the deflector to distrib-
ute the discharging water.
f'~+
"~ ~'
Vertical Sidewall
Conventional
Horizontal Sidewall Recessed
Pendent/F1/F2
I~ecessea
Horizontal Sidewall
Pendent/FP
Application
Quick response sprinklers are used in fixed fire protec-
tion systems: Wet, Dry, Deluge or Preaction. Care must be
exercised that the orifice size, temperature rating, deflec-
tor style and sprinkler type are in accordance with the lat-
est published standards of the National Fire Protection As-
sociation or the approving Authority Having Jurisdiction.
Quick response sprinklers are intended for installation as
specified in NFPA 13. Quick response sprinklers and stan-
dard response sprinklers should not be intermixed.
c
0
.~
0
The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523
Model F1 FR Quick Response Upright, Pendent & Conventional Sprinklers
Installation Wrench: Model D Sprinkler Wrench
Installation Data:
Nominal Thread Nominal K Factor Sprinkler Approval
(]rifire Size Height Organization
Sprinkler Identification Number
US Metric ' Upright
Standard-Upright (SSU) and pendent Deflectors Marked to Indicate Position
%z" (15mm) Yz" NPT(R'/z) 5.6 80 2.25" (57mm) 1, 2, 3, 4 RA1425~~~
Conventional-Install in Upright or Pendent Position
15mm"' '/z" NPT(R'/z) I 5.6 80 ~ 57mm 3,4
"` cULus listed corrosion resistant (Polyester coated) sprinkler
'71 Polyester coated FM approved sprinkler.
• ry v
~~
Upright
Pendent
Conventional
Model Fi FR 56 Quick Response Recessed Pendent Sprinkler
Installation Wrench: Model GFR2 Sprinkler Wrench
Installation Data: _ _
Nominal Thread _ K Factor...,- Sprinkler Sprinkler Identification Number
--
Orifice 1 Size US Metric Height (SIN)
~ __
'/1" (15mm) ~ ''/z" NPT(R'/z) 5.6 ~ 80 ~ 2 25' (57mm) RA 14 i4
"' Refer to escutcheon data table for approvals and dimensions.
1 r/~' HOLE IXA.
(sT.1mR,)
r r5/16" ON
(ts ammJ
~-
~~ _ _a
rL-==T-9°i~
1' X 1/7' REDUCER
LURN COLLAR ~--------~
UNTIL TIGHT
AGAINST SPRINILL ER ~
WRENCH BO55 ~ ~ /
0 \ I ~
1 ! ~__ _ 1
CJL L/ J _ ' FACE OF FITTM'L IO L'l
AarusruENT('f OOSVtl c~ EnINC aI+IENSroN
Im_ --
(~.amm/ trI
n'
a zT/sz' ou Bi~FCO~
[FZ zmR,)
(IJ REFER TO Ft tr Fp ESCUTCHEON MIA TABLE FOR APPROYAL$ ANO OIMENSroNS.
Model F1FR 56/F1 or F2
2.
CElClNG
Pendent
RA1414''jzj
RA1475
1 5/B" OIA. (66.lmmJ
HOCE IN CElUNG
2 5/16" D(A, (58.7mmJ
CUP
r-~ ~
~ __I____
~__-
1
\~ ,
FACE OF FITTING
i0 FgCE OT CffLfNC
DIMENSION(II
(LJ
ADJUSINfNT ('~
q"
OrsF001
(I) RFFER ro FP ESCUTCHEON DAlA TABLE FQq gPPROY.ALS AND DIMENSIPNS.
Model F1FR 561FP
I" X i/1" REDUCER
Model F1 FR Quick Response Vertical Sidewall Sprinkler
Installation Wrench: Model D Sprinkler Wrench
Installation Position: Upright or Pendent
Approval Type: Light Hazard Occupancy
„'v`~,.M`.v.. -M-^
l • Nominal K Factor
Sprinkler
Approval Sprinkler
Nomina
Orifice Thread Size
US
Metric
Height
Organizations Identification
Numbers (SIN)
'/z" (15mm) '/z" NPT (R112) 5.6 8.0 2.25" (57mm) 1,2,3,4 RA1485
15mm ''/z" NPT (R1l2) 5.6 8,0 2.25" (57mm) 4'"
~" LPC Approval is for pendent position only.
Vertical Sidewall
Sprinkler Type Deflector to Ceiling Distance
(Min. -Max.)
Upright 4" { 102mm) - 12" (305mm)
Pendent 4" (102mm) - 12" (305mm)
Model F1 FR Quick Response Horizontal Sidewall Sprinkler
Deflector: HSW
Installation Wrench: Model D Sprinkler Wrench
Installation Data: Horizontal Sidewall
~ Sprinkler ApprovalOrganizatlons
Nominal K Factor Height and Type of Approval Sprinkler
Nominal Orifice Thread Size -- Identification
US Metric Light Hazard Ordinary Numbers (SIN)
Hazard
''/z" (15mm) ''/z" NPT (R1/2) 5 6 80 2.63" (67mm) 1,2 1 RA 1435
t `=t
a •e
,, {`~~~~, f. ~i
Horizontal Sidewall
l1J
FACE OF F/TYING
TO FACE OF CEILING
DIMENSION 1 1/4" M1N.
[31.8mmJ
~2 1/4" HOLE OGI. 1/8" 4"-6"
(57.2mmJ [ 1 D 1.6mm- 152.4mm]
[3.2mm) CEILING TO
1" X 1/2" REDUCER DEFLECTOR
rt
r--
•-
[49.2mm] i ~ i l li il~l'Ii Ui I _-- 2 27/J2" DIA.
I ~ ! [72.2mm]
TURN COLLAR UNT/L ~ ~~V'
TIGHT AGAINST SPRINKLER \\`!
WRENCH BOSS.
1
ADJUSTMENT
01 JFCOJ
(1J REFER TO ESCUTCHEON DATA TABLE FOR APPROVALS AND DIMENSIONS.
3.
Model F1 FR Quick Response Concealed Pendent Sprinklers
Installation Wrench: Model RC1 Sprinkler Wrench
Technical Data:
Nominal "K" Factor
- -
Thread Temp
--- --- Rating '
---
{ Max.
Bulb j Sprinkler
Orifice
US r
Metric Size ;Model
Sprnkler
Cover Ambient
Temp Color Approvals ~ Identification
~ Number(SIN)
%s" (15mm) 5.6 80
_ %z" NPT ! F1FR
~ ... 135°FJ57°C 135°F/57°C 1
_.. -.T 100°F/38°C Orange 1, 2 RA 1414
'/z" (15mm) 5.6 80 '/z" NPT I F1FR 155°F168°C 135°F157°C ~ 100°F/38°C ' Red 1 2, 4` _ RA1414
'h" (15mm) 5.6 ~ 80 ''/z" NPT F1FR 175°Fl79°C 165°F/74°C ~ 100°F/38°C Yellow 1, 2 RA 1414
''/z" (15mm) 5.6 80 '/z" NPT . F1FR 200°F193°C 165°F/74°C 1 100°F/38°C Green 1, 2 RA1414
"` For VdS only = 155°Fl68°C Norbulb and 112" [12,7mm] adjustment.
i" x 1/2" REDUCWC
TEE OR ELBOW _ - _ _
7 5/8" DW.
2 5/16" DIA _- _ l -~ HOLf IN CEILING
CUP _ ~ -_ __--~
i 1/2" MAX.
-_ ~~ Ii_0_. VlI ~.,I. _ FACE OF FITTING
- TO FACE OF CEL[JNG
.~ I T~ , ~ ~ ~ ~ ~~ D1MEN5lON
CEILING %' ~ ~ ~ _~
1 - -.
1/2" MAX, IS/76-
COVER ADJUSTMENT I
COVER PLATE - ~T
ASSEMBL r J g/ 16 " DIA. T
SPRINKLER /
1/2" ADJUSTMENT °„rw~
Figure 1
Jnstallation Aid
A protective cap is included for use during installation.
Important: The F1FR 56 Sprinkler with Model CCP cover
plate is not an FM Approved combination.
Installation
Quick response sprinklers are intended for installation
as specified in NFPA 13. Quick response sprinklers and
standard response sprinklers should not be intermixed.
The Model F1 FR 56 Recessed Quick Response Sprin-
klers are to be installed as shown. The Model F1 or F2 Es-
cutcheons illustrated are the only recessed escutcheons
to be used with the Model F1 FR 56 Sprinklers. The use
of any other recessed escutcheon will void all approvals
and negate all warranties.
When installing Model F1FR 56 Sprinklers, use the
Model D Sprinkler Wrench. Use the Model GFR2 Wrench
for installing F1FR 56 Recessed Pendent Sprinklers. Any
other type of wrench may damage these sprinklers.
NOTE: A leak tight ''/z" NPT (R1/2) sprinkler joint can
be obtained with a torque of 8-18 ft-Ibs (10,8 - 24,4 N-m).
Do not tighten sprinklers over maximum recommended
torque. It may cause leakage or impairment of the sprin-
klers.
The Model F1 FR 56/CCP Concealed Sprinkler uses the
''/z" orifice, ''/z" NPT (R1/2), 135°F (57°C), 155°F (68°C),
175°F (79°C) or 200°F (93°C) Model F1 FR 56 Pendent
I
t " , r/7 " RfDUCrNC
TE£ OR £L80W .._.. _.._
__..
`Jf'I`
~ r
2 5/8 DIA.
2 5/16" O1A - HOLE /N C£ILINC
CUP
~ I i/7" MAX.
-'~ FACE OF FITTNG
!
;::~;-' TO FACf OF CflLING
T.-;;-~
~~
y" i
-'1- `'
~ DIMENSION
CC2INC
I
~ _ - 1
"
( 5/f6" MRX. J/4
COVER A0.1U51MFNT I
COVER P(~4 TE - ~
~ ASSEMBLY 3 5/16 " DLA.
$PRINKLfR -~
~
~ 5/16" AD JUSTMENT o~+mw
I____.._......~._._.. _ _.__-..
Figure 2
Sprinkler with a threaded Model CCP cup which is fac-
tory attached to the sprinkler. The assembly is complet-
ed by the installation of the attractive, low profile, 135°F
(57°C) or 165°F (74°C) rated Model CCP push on cover
plate assembly. The cover plate and sprinkler cup as-
semblies are joined using a cover plate skirt with flexible
tabs for threaded engagement. A choice of two cover
plate assemblies provide either''/z" (13mm) or e/,s" (8mm)
of cover adjustment.
Do not install these sprinklers in ceiling which have
positive pressure in the space above.
After a 25/a" (67mm) diameter hole is cut in the ceil-
ing, the sprinkler is easily installed with the Model RC1
Wrench, A Teflon' based thread sealant should be
applied to the sprinkler threads only. The Model RC1
Wrench is then used to engage the sprinkler wrenching
surfaces and to install the sprinkler in the fitting. When
inserting or removing the wrench from the sprinkler/cup
assembly, care should be taken to prevent damage to
the sprinkler. DO NOT WRENCH ON ANY OTHER PART
OF THE SPRINKLER. The cover plate is then pushed
onto the cup. Final adjustment is made by hand turning
the cover plate until the skirt flange makes full contact
with the ceiling. Cover plate removal requires turning in
the counter clockwise direction.
4.
After installation, inspect all sprinklers to ensure that
there is a gap between the cover plate and ceiling and
that the four cup slots are open and free from any air flow
impediment to the space above.
Concealed cover plate/cup assemblies are listed only
for use with specific sprinklers. The use of any other con-
cealed cover plate/cup assembly with the Model F1 FR
56 Pendent Sprinkler or the use of the Model CCP Con-
cealed cover plate assembly on any sprinkler with which
it is not specifically listed my prevent good fire protection
and will void all guarantees, warranties, listings and ap-
provals.
Glass bulb sprinklers have orange bulb protectors to
minimize bulb damage during shipping, handling and
installation. REMOVE THIS PROTECTION AT THE TIME
THE SPRINKLER SYSTEM IS PLACED IN SERVICE FOR
FIRE PROTECTION. Removal of the protectors before this
time may leave the bulb vulnerable to damage. RASCO
wrenches are designed to install sprinklers when covers
are in place. REMOVE PROTECTORS BY UNDOING THE
CLASP BY HAND. DO NOT USE TOOLS TO REMOVE
THE PROTECTORS.
Temperature Ratings
~
j Classification Sprinkler
Tem erature
Max. Ambient
T
Bulb Color
°C
°F em
p.
_ __
---- .._ _
Ordinary 57 135 100°F (38°C) Orange
Ordinary 68 155 100°F (38°C) Red
Intermediate 79 175 150°F (66°C) Yellow
Intermediate 93 200 150°F (66°C) Green
Hi h (" 141 286 225°F 107°C Blue
"' Not available for recessed sprinklers .
Escutcheon Data (')
.. __- Face of Fddng to
„
I 'ten Approvals
Model Adjustment A
i Ceiling or Wall
Dimension Oimension
. _ - -
Max Recess _.__
1'/." (38. tmm) '/,fi" -shy'
Ft 1 3 4
-- --
Mn Recess
'!<" (19.1 mm)_~ (5rrm - 24mm1.....
„
"
Max Recess - "/,5
1 '/1' (381 mm) 'h~,
1 2, 3.4
I F2 Mm Recess . _?~-(~n)._ ~ ~~? ~~_
..
..
~ FPPush-0n/ Max Recessed 'h5'(11mm} ~ 1'h (38.1mm)
Thread-0fl t 4 _. _
-._ _. Mn Recessed
- "/,e (24mmZ....~ 1 ' (25 4mm)........
_
"'SIN RA1435 - cULus and FM permits use with F 1 or F2 escutcheons for light
hazard only.
Maintenance
The Models F1FR 56 and F1FR 56 Recessed Sprinklers
should be inspected quarterly and the sprinkler system
maintained in accordance with NFPA 25. Do not clean
sprinklers with soap and water, ammonia or any other
cleaning fluids. Remove dust by using a soft brush or
gentle vacuuming. Remove any sprinkler which has
been painted (other than factory applied) or damaged
in any way. A stock of spare sprinklers should be main-
tained to allow quick replacement of damaged or oper-
ated sprinklers. Prior to installation, sprinklers should be
maintained in the original cartons and packaging to mini-
mize the potential for damage to sprinklers that would
cause improper operation or nan-operation.
Sprinkler Types
Standard Upright
Standard Pendent
Conventional
Recessed Pendent
Vertical Sidewall
Horizontal Sidewall
Recessed Horizontal Sidewall
Concealed pendent
FinichPS (i1
Bronze Brass
Chrome Plated i Chrome Chrome
White Polyester 'Plated White
~^,,.,forl (nl(SI l In/hita Pai ntafl
Bright Brass !" Bright Brass Bright Brass
Black Plated ~ Black Plated Satin
Black Paint `z' Black Paint Off White
Off White (=% Off White Black Paint
"' Other finishes and colors are available on special order.
Consult the factory for details.
izj cULus Listed only.
"' 200°F (93°C) maximum.
°' cULus listed "corrosion resistance" applies to SIN Numbers
RA1425 (Upright) and RA1414 (Pendent) in standard black or white.
15i FM Approvals finish as "Polyester coated" applies to SIN Number
RA14t4 (Pendent) in standard black or white.
Ordering Information
Specify:
1. Sprinkler Model
2. Sprinkler Type
3. Orifice Size
4. Deflector Type
5. Temperature Rating
6. Sprinkler Finish
7. Escutcheon Type
8. Escutcheon Finish (where applicable)
9. Cover plate Model
10. Cover plate Thread size
11. Cover plate Temperature
12. Cover plate Adjustment
13. Cover plate Finish
Note: When Model F1FR 56 Recessed sprinklers are ordered. the
sprinklers and escutcheons are packaged separately.
5.
Rel fable... For Com lete Protect i o r1
p
Reliable offers a wide selection of sprinkler components. Following are some of the many
precision-made Reliable products that guard life and property from fire around the clock.
• Automatic sprinklers
• Flush automatic sprinklers
• Recessed automatic sprinklers
• Concealed automatic sprinklers
• Adjustable automatic sprinklers
• Dry automatic sprinklers
• Intermediate level sprinklers
• Open sprinklers
• Spray nozzles
• Alarm valves
• Retarding chambers
• Dry pipe valves
• Deluge valves
• Detector check valves
• Check valves
• Electrical system
• Sprinkler emergency cabinets
• Sprinkler wrenches
• Sprinkler escutcheons and guards
• Inspectors test connections
• Sight drains
• Ball drips and drum drips
• Control valve seals
• Air maintenance devices
• Accelerators for dry pipe valves
• Mechanical sprinkler alarms
• Electrical sprinkler alarm switches
• Water flow detectors
• Air compressors
• Pressure gaugesldentification signs
• Fire department connection
The equipment presented in this bulletin is to be installed in accordance with the latest published Standards of the National Fire Protection Association, Factory
Mutual Research Corporation, or other similar organizations and also with the provisions of governmental codes or ordinances whenever applicable.
Productsmanufactured and distributed by Reliable have been protecting life and property for over 90 years, and are installed and serviced by the most highly
qualified and reputable sprinkler contractors located throughout the United States. Canada and foreign countries.
Manufactured by
O The Reliable Automatic Sprinkler Co., Inc. ~ Recycled
~ e (800) 431-1588 Sales Offices Paper
'~ ~ (8D01 848-6D51 Sales Fax Rev~s;on Imes md,cate updated or new data
(914) 829-2042 Corporate Offices
www.reliablesprinkler.com Internet Address EG Pnnted .n u s n ozno P/N 9999970300
Sprinkler Drop
FLEXIBLE SPRINKLER DROP ~ U~ us FM
• Easyflex Flexible Sprinkler Drop provides fast and simple APPl10v®
installation.
• lmproved NEW TBS Brackets assures stability in the most challenging environment.
FEATURES
Hoses
• Lengths: 24", 36", 48", 60", and 72"
• Sizes: 1/2" ar 3/4"
Straight or 90° Outlet Nipples
• Type: Braided (UL / FM)
Unbraided (UL
Brackets
• TBS System (UL / FM): T-Bar Grid
Commercial Suspend Ceiling
• MSB System (FM): Metal
Stud/Sheetrock Suspend Ceiling
TECHNICAL DATA
4
TE
• Temperature: 225°F
• Pressure: 175 psi
• Connection: Inlet: 1" NPT
Outlet: 1/2" or 3/4" NFT
• Maximum Bend Radius: 4" ([.TL), 8" (FM)
*Do not bend within 2.52 inches from
connection nuts.
• Maximum Number of Bend: Refer to
Friction Loss Data N
• K-Factor: 112" Outlet: 5.6 gpm
3/4" Outlet: 8.0 gpm
PRODUCT SUBMITTAL Job Name: Job Location:
Submitted By: Date:
Approval: Date:
i5ogz Parkway loop Unit D T:7u+ z58 z6oo / 888 577 8999
Tustin, CA gz78o-65zz F:7i4 z58 z6oz
www.easyftexusa.com E-mail:infot°?easyfiexusa.com
EASYFLE~J~C
prinkler Drop
FRICTION LOSS DATA
Length
(Inch) Outlet
Connection Maximum Number
of 90° Bends (IJL) Equivalent Length of 1 in. Schedule 40 Pipe, ft
(FM ! UL)
" 112" 1 6.8 / 18
24 314„ 1 4.7 ! 18
• 112" 2 11.5 / 31
36 314" 2 10.6 / 34
„ 1/2" 3 16.7 / 48
4S 314" 3 12.7 / 51
112" 4 20.6 ! 60
60" 314„ 4 17.0165
" 1!2" 4 24.0171
72 3/4" 4 19.8 ! 72
* Differences of Friction Loss Data are due to the different test methods and conditions between UL and FM Approval.
FM Approval: 8" Minimum Bend Radius, where C =100 / UL: 4" Minimum Bend Radius, where C = 120
APPLIANCE STANDARDS
• American Society for Testing and Methods (ASTM)
- ASTM C635 Standards Specification for the Manufacture, Performance, and Testing of Metal
Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
- ASTM C636 Standards Practice for Installation of Metal Ceiling Suspension Systems for
Acoustical Tile and Lay-in Panels
• FM Approval (FM) - FM Class Number 1637 Approved Standard for Flexible Sprinkler Hose
with Threaded End Fittings
National Fire Protection Association (NFPA)
- NFPA 13 Standard for the Installation of Sprinkler Systems
- NFPA 13D Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings
and Manufactured Homes
- NFPA 13R Standard for the Installation of Sprinkler Systems in Residential Occupancies Up to
and Including Four Stories in Height
• Underwritings Laboratories, Inc. (UI.) - UL 2443 Standards for Flexible Sprinkler Hose with
Fittings for Fire Protection Service
MATERIAL SPECIFICATION
1. Corrugated Flexible Hose: SS 304
2. Braid: SS 304
3. Nut and Nipple: Zinc Plated Carbon Steel
4. End Brackets: Zinc Plated Carbon Steel
5. Stock Bar: Zinc Plated Carbon Steel
6. Center Bracket: Zinc Plated Carbon Steel
7. Gasket: EPDM
15o4z Parkway Loop Unit D T:714 z58 z6oo / 888 577 8944
Tustin, CA 4z78o-65zz F:71[F z58 z6oz
www.easyftexusa.com E-mail:infoQeasyftexusa.com