20160149 Permit Pkg 03102016City of Yelm
Community Development Department
Building Division
Phone: (360) 458 -8407
Fax: (360) 458 -3144
Applicant:
Name: MR. DOUG'S FAMILY RESTAURANT
Address: PO BOX 698
YELM WA 98597
Property Information:
Site Address: 7f11 1 nwn
Assessor Parcel No.: 22730110202
Contractor Information:
Name: SOUND HEATING & AC
Address: CURTIS HOOD
5526 184TH ST. E, STE. A
PUYALLUP WA 98375
Contractor License No.: 10696
Project Information:
Project: MECHANICAL
Description of Work:
Sq. Ft. per floor:
First
Second
Third
Garage
Basement
Fees:
Item
MECHANICAL
PLUMBING
Permit No.: 20160149
Issue Date: 3/12016
(Work must be completed within 180 days)
Phone: 360- 458 -2255
Owner: TRACY WOOD
Subdivision: Lot:
Phone:
Expires: 12/31/2015
Heat Type (Electric, Gas, Other):
Contractor Fees
SOUND HEATING & AC lll✓✓✓ J $ 46.50
Owner Assigned $ 32.00
TOTAL FEES: $ 78.50
Applicant's Affidavit:
I certify that I have read and examined the information contained within the application and know the same
to be true and correct. I also certify that the proposed structure is in conformity with all applicable City of
Yelm regulations including those governing oning and land subdivision, and in addition, all covenants,
easements and st ictions of record If a lying a contractor, I further certify that I am currently
registered in t St to o�,Was ngt / /
Signature I Date � < y—,
Firm
OFFICIAL USE ONLY
# Sets of Prints:
Final Inspection:
Date:
By:
City of Mm
(36 ) 458 -3244
REC #: 00225020 3/10/2016 12:49 PM
OPER: CO TERM: 001
REF #:
PAID BY:
ACCT #: XXXXXXXXXXXXXXXXXXX
AUTH #: 002475
TRAN #: 000000000290
TRAN: 33.0000 BUILDING PERMITS
20160152 33.25CR
MCVICKER, JEFF
1304 YELM AVE E A -101
MECH 33.25CR
TRAN: 33.0000 BUILDING PERMITS
20160149 46,50CR
MR. DOUG'S FAMILY RESTAURANT
201 103RD
MECH 46.50CR
TENDERED: 79.75 CREDIT CARD
APPLIED: 79.75-
CHANGE: 0.00
CITY OF YELM
COMMERCIAL BUILDING PERMIT APPLICATION FORM
Project Address:d10 ( 10 3 r0 4VIe _1W. Parcel #:
Zoning;
Current Use: �esT�l��.�(s Proposed Use: SA "^-e
New Construction Re -Model / Re -Roof / Tenant Improvement
Plumbing Mechanical Fire Prevent/Suppress /Alarm Other
Project Description /Scope of Work: /e*eIQG' 02 /f.C_7 AT �%„„s
Project Value 23,400
5/0400
Building Area (sq. ft) Parking Garage 1s` Floor 2nd Floor 3rd Floor,
Building Height /6-
Are there any environmentally sensitive areas located on the parcel? X 40 If yes, a
completed environmental checklist must accompany permit application.
BUILDING O NE NANT NAME: oo
ADDRE A o(,o & r EMAIL ,-•
CITY n, STATE G ZIP TELEPHONE 0, y SO0
ARCHITECT /ENGINEER LICENSE #
ADDRESS EMAIL
CITY STATE ZIP TELEPHONE
,mow CONTRACTOR TELEPHONE
ADDRESS EMAIL
CITY STATE ZIP FAX
CONTRACTOR'S LICENSE # EXP DATE CITY LICENSE #
PLUMBI „IVG G(NT ,x, y CSR TELEPHONE
ADDRESS EMAIL
CITY STATE ZIP FAX
CONTRACTOR'S LICENSE # EXP DATE CITY LICENSE #
MECHANICAL CONTRACTOR d E4W- 4 TELEPHONE o?S-3- 775--335-0
AD DR SSS9<- /b`'7 J'r-, Eos r EMAIL 46-1i-14D o�.uo heAT7ri , Cor•,
CITY Z o STATE 6(1,1. ZIP 7S FAX a5 029 _
CONTR CT 'S LICENSE #&�ll EXP DATE CITY LICENSE #! — 0�6
1P—!?— 17
Copy of City Mitigation documentation (TFC).
I hereby certify that the above information is correct and that the construction on, and the occupancy and the use of the
above described property will be in accordance with the laws, rules and regulations of the State of Washington and the
City of Yelm
/_.97 P -14
Applicant's SignaWe Date
Owner/ Contractffr / Owner's Agent/ Contractor's Agent/ Tenant (Please circle one.)
All permits are non - transferable and will expire if work authorized by such permit is not begun
within 180 days of issuance, or if work is suspended or abandoned for a period o�
0 1 20i5
(360) 45IP3985 -------------------
105 Yelm Ave W (360) 458 -3144 FAX
Yelm, WA 98597 www.ci.yelm.wa.us
�k�sTir, g Utirr's 7'oT t wi�T
TRM/E'M wCD060- s4- 202.02
All Dimensions Are In Inches %DIA HOLE CONTROL WIRING
I� 11A
POWER SUPPLY 116 DIA.
HOLE; 2" K.O. ! / `51 A
57 I
23'7
I
NEATER ACCESS PANEL
313/4
` 5% 36
JILTER ACCESS PANEL
IOU 1914>
r
1134. ' 24f 1
i 1
21/4 ` �131A 2'i
OPTIONAL
261y ` ECONOMIZER
CONDENSATE DRAIN
COUPLING 'A FEMALE.
SCHED. 40 PVC PIPE
CENTRP
DUCTFLANGES
END
36" CLEARANCE
'SIDE RAIL I.D. Air Supply
46" CLEARANCE T—
26-1/16
Table 1 Unit Wiring
Unit
Tons Model No.
,. WCOO60A1
5 WCD060A3
WCDO6OA4
WC0060AW
5 Ton
Downfiow
Packaged
Heat Pump
WCD060A
-I OPTIONAL
MANUAL /MOTORIZED
OUTSIDE AIR
D
Unit
Operating
Voltage Range
187-253
187 -253
414 -506
518-632
r--1
1 I
� I �
i tow
32 V
51% —
Minimum
Circuit
Ampacity
44
30
16
11
C
24
57
I.D.
Air
Return
Maximum Fuse Sae or
Maximum HACK' Type
Circuit Breaker Size'
7D'"
45
25
15
NOTE:
1. HACR circuit breakers are not available at present for 460V. 575 or above 100A CW 24OV.
2. Some value applies to maximum circuit site for Canadian installation.
Table 2 Maximum Unit And Corner Weights (Lbs)
Unit Maximum Weights (Lbs) Corner Weights (Lbs)'
Tons Model No. Shipping Net A B C D
WCDO6QA 523 , .,
NOTE. L'a " Ic j
1. Corner Weights are given for information only. Unit is to be supported wrainuoully try a or equivalent frame
support.
0 1 2.15
SY: ....................
Table 3 General Data
WCDO60A1 WCDO6OA3,A4,AW
Cooling Performance'
Gross Cooling Capacity 63,400 62,900
EER /SEER1 9.05/9.80 9.00/9.30
ARI Indoor Airflow (CFM) 2,000 2,000
ARI Net Cooling Capacity 60,500 60,000
System Power KW 6.70 6.67
Heating Performance'
High Temp. Btuh Rating 60,500 62,000
System Power KW /COP 5.65/3.14 5.87/3.001
Low Temp. Btuh Rating 34,200 34.000
System Power KW /COP 4.68/2.14 9.03/2.107
HSPF (Btu /Watt-hr)2 7.15 7.20
Compressor
No./Type 1 /ClimatuffTM 1 /Climatuff'.
ARI Sound Rating (GELS)' 8.6 8.6
Outdoor Coil -Type Plate Fin Plate Fin
Tube Size (in.) 00 38 .38
Face Area (scl ft) 14.8 14.8
Rows /FPI 2/15 2/15
Refrigerant Control Expansion Valve Expansion Valve
Indoor Coil -Type Plate Fin Plate Fin
Tube Size (in.) .38 .38
Face Area(sq ft) 5.49 5.49
flows /FPI 4/12 4/12
Refrigerant Control Expansion Valve Expansion Valve
Drain Connection No. /Size (in.) 1 /3A" PVC 1 /'A" PVC
Outdoor Fan -Type Propeller Propeller
No. Used /Diameter(in.) 1/22 1/22
Drive Type /No.Speeds Direct /1 Direct /1
CFM' 4,800 4,800
No. Motors /HP 1450 1/.50
Motor RPM 1,075 1,075
Indoor Fan - Type FC Centrifugal FC Centrifugal
No. Used 1 1
Diameter x Width (in.) 11.8 x 9.5 11.8 x 9.5
Drive Type /No. Speeds Direct /3 Direct /3
No. Motors 1 1
Motor HP (Standard /Oversized) .75/- .75/-
Motor RPM (Standard /Oversized) 1,075/- 1,075/ -
Motor Frame Size (Standard /Oversized) 48/- 48/-
Filters - Type /Furnished? Throwaway/Yes Throwaway /Yes
(No.) Size Recommended (in.) (2) 16 x 25 x 1 (2) 16 x 25 x 1
Refrigerant Charge (Lbs of R -22)6 11.55 12.70
NOTES:
1. Rated in accordance with ARI Standard 240.
2. Rated in accordance with DOE test procedure. HSPF is at the minimum design requirement for Region rv.
3. Rated in accordance with ARI Standard 270.
4. Standard air -dry coil outdoor.
5. Approximate value. For more precise value, see unit nameplate and service instructions.
6. WCD06OA4 high temp. system power [KW) 5.82
7. WCD06OA4,AW low temp. system power (KW) 4.78
� 24
RETURN U
cip
20 � \ DUCT Cl
SUPPLY
DUCT Table 4 Accessory Weights (Lbs)
I
SIDE RAIL
Accessory Net Shipping
%- FLANGES i I I Field Assembled Roofcurb 79 87
BOTH DUCTS NofE: Economizer 66 94
1. CUr DUCT tiUlF IN HOOF
TO ACCOMMODATE DUCTS 25% Manual Fresh Air Hood 7 11
AND INSULATION OF 25% Motorized Fresh Air 19 22
CENTER DUC1S,
Electric Heat
RAIL J' FLANGE Minimum 16 20
i SUPPORTS Maximum 38 42
Single Source Power Entry Kit
\ I BAYSPEK023, 024, 025,
026, 028, 037A 8 10
END flA1L
All Other Kits 15 17
7o- Ms
2
Table 5 Gross Cooling Capacities (MBh) 5 Ton Single Phase WCD06OAl
Ambiem Ta 4-Mure (F)
� g(p 105 11b
Enter.
Entering Wet Bulb (F)
Dry
n 6t 87 73 61 67 73
CFM
Bulb
Enter.
Dry
C1
a>
71 61
Aelciw
(F)
MBh
SHC M8h
SHC
MBh
SHC
M8h
SHC M8h
SHC
MBh
SHC
MBh
SHC MBh
SHC
MBh
SHC
MBh SHC MBh SHC MBh SHC
76
68.8
46.6 65.2
36.4
71.6
23.8
66.1
44.6 62.1
33.8
68.3
26.1
533
42.6 59.1
32.2
855.1
21.4
50.7
40.6 58.1 30.6 61.9 20.3
80
58.8
56.6 65.2
44.1
71.6
33.8
66.1
53.1 611
42.2
68.3
330
533
50.7 69.1
40.2
85.1
31.7
60.7
484 66.1 384 61.9 30 -8
1800
86
59.8
69.8' 65.2
62.9
71.6
44.1
57.0
67.0' 62.1
50.6
68.3
43.6
54.4
54.4' 69.1
48.4
66.1
42.4
61.7
61.7' 66.1 461 61.9 41.3
90
63.1
63.1' 65.2
61.6
71.6
61.7
60.2
60.2' 62.1
59.2
66.3
61.6
57.3
57.3' 69.1
56.4
66.1
49S
54.6
54.6' 56.1 638 61.9 47,2
75
60.0
49.1 56.5
37.2
731
248
571
47.0 634
35.6
69.7
27.5
&4.4
449 60.3
33.9
66.4
22.6
61.7
42.8 512 32.2 63.1 21.3
80
60.0
58.4 66.5
46.4
73.1
35.5
67.2
55.9 634
44.4
693
34.8
54.4
53.4 60.3
424
66.4
33.4
61.7
50.9 571 40.4 53.1 32.6
2000
85
629
62.9' 66.5
557
73.1
46.4
60.0
60.0' 63.4
631
69.7
45.8
571
671' 60.3
50.9
86A
44.6
64.4
544' 57.2 48.5 53.1 43.6
90
65.1
65.1' 66.5
642
73.1
54.4
62.1
621' 63.4
623
697
543
59.1
59.1' 603
59.3
66.4
624
684
66.4' 57.2 58.6 63.1 49.7
75
60.6
51.5 67.2
39.1
73.0
26.1
57.8
49.3 64.0
37.3
704
28.8
56.0
47.1 60.9
35.6
67.1
23.7
522
44.9 67.8 33.8 63.8 22.4
f30
61.3
61.3' 67.2
48.7
718
37.3
58.7
56.7' 64.0
46.7
70A
36.5
56.0
56.0' 609
44.b
67.1
35.1
63.4
634' 67.8 42.4 63.8 34.1
2200
85
66.0
66.0' 67.2
584
730
48.7
630
63.01 64.0
55.9
70.4
480
601
60.11 60.9
63.5
67.1
46.9
57.1
57.1' 57.8 61.0 638 46.7
90
69.8
69.8' 71.8
71.81
73.8
57.2
666
66.6' 68.5
68.5'
70.4
57.1
63.3
63.3' 651
65.21 67.1
55.1
WA
60.4' 62.1 62.1' 618 62.1
75
81.2
53.6 6Z8
40.6
74.6
27.1
56.3
511 64.7
38.7
71,1
29.9
56.6
48-9 61.5
37.0
67.7
24.6
627
48.8 68.3 35.1 84.4 23.2
2400
90
63.7
63.7' 67.8
60.6
74.6
38.7
61.0
61.0' 64.7
484
71.1
37.9
582
58.2' 61.5
46.2
67.7
364
65.b
65.5' 583 44.0 64.4 36.4
2400
85
66.6
68.6' 67.8
60.7
74.6
50.6
66.4
654' 64.7
68.0
71.1
49.9
62.4
62.4' 61.6
66.6
673
48.7
59.3
59.3' 683 529 54.4 47.4
90
724
72.4' 73.5
73.5' 74.6
69.3
691
69.1' 70.1
70.11 71.1
592
661
65.7' 663
66.7' 67.7
67.2
62.7
62.7' 63.6 63.5' 84.4 54.1
All capacities shown are gross and have not considered indoor fan heat. To obtain net cooling subtract indoor fan heat.
MBh =Total Gross Capacity
SHC = Sensible Heat Capacity
NOTE:
1. Dry Coil Condition. Total Gross Cooling Capacity (MBh) shown to the left is not applicable. In this case the Sensible Heat Capacity (SHC) is itw total capacity.
Table 6 Gross Cooling Capacities (MBh) 5 Ton Three Phase WCD060A3,A4,AW
Ambarq Tertlporeture (F)
96 106 116
Entering Wet Bulb (F)
67 73 61 67 73 51 67 73
ChM
B5
Enter.
Dry
C1
a>
71 61
Ambarq Tertlporeture (F)
96 106 116
Entering Wet Bulb (F)
67 73 61 67 73 51 67 73
ChM
bulb
Airflow
(F)
MBh
SHC MBh
SHC
MBh
SHC
MBh
SHC M8h
SHC
MBh
SHC
MBh
SHC MBh
SHC
M8h
SHC
MOh SHC M0h SHC MBh SHC
75
68.1
46.2 64.3
35.0
70.7
23A
66.7
44.4 61.6
316
67.9
26.0
63.3
42.6 69.0
32.3
66.0
21.6
50.9
40.9 66.3 30.8 62.1 20.4
80
58.1
55.0 64.3
43.5
703
33A
55.7
62.9 61.6
42.0
679
32.9
53.3
50.7 690
40.3
660
313
50.9
46.6 66.3 387 821 31.0
1800
96
S9.2
691' 64.3
521
70.7
43-6
56.7
56.7' 616
50.3
679
43.3
54.4
644' 69.0
48A
65.0
42.4
620
52.01 66.3 48.6 62.1 41.6
90
82.5
62.51 64.3
60.8
70.7
51.2
59.9
59.9' 61.6
60.6
67.9
51.4
57.3
57.3' 59.0
664
66.0
49.9
66.0
66.0' 66.3 64.2 821 47.6
75
59.3
48.6 65.6
36.8
722
24.6
66.8
46.7 629
36.3
89.2
27.3
64.3
44.9 602
34.0
66.3
22A
61.9
43.0 67.6 32.6 63.4 21.5
80
59.3
67.8 65.6
45.8
72.2
352
56.8
65.7 629
44.2
69.2
34.6
543
53.4 802
42.4
663
33A
51.9
612 67.6 403 83.4 327
2000
85
62.3
62.3' 65.6
55.0
722
455
69.7
59.7' 629
52.9
69.2
45.5
57.2
572' 60.2
50.9
663
44.7
64.7
64.7' 67.6 48.9 634 438
90
64.5
64.5' 65.6
64.1
72.2
63.9
61.8
61.8' 829
61.9
69.2
54.1
69.1
69.1' 602
59.4
66.3
62.5
66.7
68.7' 57.6 67.0 63.4 600
75
59.9
51.0 86.3
38.6
72.9
268
67.4
49 -1 836
37.1
69.9
283
64.9
47.1 608
361
67.0
23.7
624
452 68 -1 34.1 64.0 22.6
80
603
60.71 66.3
48.1
72.9
36.9
584
58 -4' 636
46.4
699
36.3
56.0
560' 608
44.6
67.0
36.1
63.8
538' 68.1 42.7 840 34.3
2200
85
65A
65.41 66.3
57.8
72.9
482
62.7
6271 635
66.6
69.9
47.8
60.1
60.1' 60.8
53.5
67.0
46.9
67.4
57.4' 68.1 61.4 64.0 46.0
90
69.1
6911 71.0
71.0'
72.9
56.5
663
66.31 68.1
68.1'
69.9
66.8
63.3
6331 66.1
65.11 67.0
65.1
60.7
60.7' 62.4 62.4' 64.0 62 -6
75
60.5
53.0 66.9
40.1
73.6
26.8
57.9
60.9 642
38.5
70.6
29.8
55.4
48.9 61A
37.0
67.6
24.6
629
46.9 68.6 36.4 64.7 23.4
2400
80
63.1
63.11 66.9
60.0
73.6
38.3
60.7
60.7' 642
48.2
70.6
37.7
58.2
582' 61A
46.2
67.6
38.4
56.8
56.81 68.6 44.4 64.7 36.8
85
67.9
67.91 66.9
60.0
73.6
50.0
66.1
8511 642
57.7
70.6
49.6
62.4
62.4' 61.4
55.6
87.8
48.7
69.6
69.81 58.6 63.3 64.7 47.7
90
71.7
71.71 72.7
72.7'
73.6
68.7
68.8
688' 69.7
89.7'
70.6
59.0
65.7
66.7' 66.7
66.7' 87.6
571
63.1
83.1' 63.9 63.9' 84.7 54.6
All "pacifies shown are gross and have not considered indoor fan heat. To obtain net cooling subtract indoor fan heat.
MBh =Total Gross Capacity
SHC = Sensible Heal Capacity
NOTE:
1. Dry Coil Condition. Total Gross Cooling Capacity (M8h) shown to the left is not applicable. In this case the Sensibta Hest Capacity (SHC) is the total capacity.
3
Table 7 5 Ton Single/Three Phase Heating Capacities (Net) WCD060A At 2000 CFM
Outdoor
Temp
F.
Instantaneous Heating Capacity (Stuh /1000) At
Indoor Dry Bulb Temp. (Single Phase)
60 70 75 80
Integrated Heating Capacity (Btuh/1 000) At
Indicated Indoor Dry Bulb Temp. (Three Phase)
60 70 75 80
Total Power in Kilowatts At
Indicated Indoor Dry Bulb Temp.
60 70 75 80
-8
12.5
12.3
12.2
12.1
10.8 10.7
10.6
10.6
3.73
3.87
3.94
4.01
-3
17.0
16.7
16.5
16.4
15.6 15.3
15.2
15.1
3.89
4.03
4.11
4.18
2
21.4
21.1
20.9
20.7
20.4 20.0
19.8
19.6
4.04
4.20
4.27
4.35
7
25.9
25.4
25.2
25.0
25.1 24.7
24.4
24.2
4.20
4.36
4.44
4.52
12
30.4
29.8
29.5
29.2
29.9 29.3
29.1
28.8
4.35
4.52
4.60
4.69
17
34.9
34.2
33.9
33.5
34.7 34.0
33.7
33.3
4.50
4.68
4.77
4.86
22
37.7
36.9
36.6
36.2
37.6 36.9
36.6
36.2
4.63
4.81
4.90
5.00
27
40.4
39.6
39.3
38.9
40.6 39.8
39.4
39.0
4.76
4.95
5.04
5.14
32
43.2
42.4
41.9
41.5
43.6 42.8
42.3
41.9
4.89
5.08
5.18
5.27
37
46.0
45.1
44.6
44.2
46.6 45.7
45.2
44.8
5.01
5.21
5.31
5.41
42
48.8
47.8
47.3
46.8
49.6 48.6
48.1
47.6
5.14
5.35
5.45
5.55
47
61.7
60.5
59.9
59.3
63.3 62.0
61.4
60.7
5.43
5.65
5.76
5.87
52
66.2
64.9
64.2
63.6
68.0 66.7
66.0
65.3
5.58
5.81
5.93
6.04
57
70.7
69.3
68.6
67.8
72.8 71.3
70.6
69.9
5.74
5.97
6.09
6.21
62
75.2
73.7
72.9
72.1
77.6 76.0
75.2
74.4
5.89
6.14
6.26
6.38
67
79.6
78.0
771
76.4
82.3 80.7
79.8
79.0
6.05
6.30
6.42
6.55
72
84.1
82.4
81.6
803
87.1 85.3
84.5
83.6
6.20
6.46
6.59
6.72
Correction Factors - Other Airflows
(Value at 2000 Cfm X Correction
Factor = Value at New Airflow)
Airflow
1750 2250
Airflow 2000 Cf.
Heating Capacity
x 0.99 x 1.01
Heating CapacitylHigh Temp.) =
60500 Btuh
Compressor
Kw
x 1.01 x 0.99
Heating Capacity (Low Temp.) =
34200 Btuh
Compressor Power (High Temp.)
=4300 Wafts
Integrated values include
the effects at defrost in
the frost region.
Compressor Power (Low Temp.)
= 3330 Watts
Values at ARI Rating Conditions of 70&47/43 (High Temp. Point)
Outdoor Fan Power = 500 Watts
70& 17/16 (Low Temp. Point)
Indoor Fan Power= 850 Watts
Table 8 Electrical Characteristics - Motors - 60 Cycle
NOTE:
1. Amp draw for each motor, multiply value by numbers of motors to determine total amps.
Compressor Motor
Standard Evaporator Fan Motor
Standard Motor
Amps
High Speed
Medium Speed
Low Speed
Amps
Phase
Unit
Phase
HP
RPM
FLA
LRA
1
Tons Model No.
Vohs Phase
HP
RPM
FLA
LRA
Volts
WCD06OAl
208 -230 1
.75
1075
6.4
8.3
208 -230
WCD06OA3
208 -230 1
.75
1075
4.9
8.3
208 -230
5
WCD060A4
460 1
.75
1075
1.9
4.3
460
WCD060AW
575 1
.75
1075
1.5
31
575
NOTE:
1. Amp draw for each motor, multiply value by numbers of motors to determine total amps.
Compressor Motor
Condenser Fan Motor
Standard Motor
Amps
High Speed
Medium Speed
Low Speed
Amps'
Phase
RLA LRA
Phase
HP
RPM
FLA
LRA
1
30.2 140
1
.50
1075
3.2
6.5
3
17.6 118
1
.50
1075
3.2
6.5
3
9.0 71
1
.50
1075
1.6
3.6
3
6.5 43
1
.60
1075
1.1
2.7
Table 9 Evaporator Fan Performance Standard Motor
External Static Pressure (Inches of Water) & Motor Power (Bhp)!
Standard Motor
High Speed
Medium Speed
Low Speed
Unit
Tons Model No. CFM
ESP BHP
ESP BHP
ESP BHP
1600
1.21 .63
1.01 .55
.85 .51
1800
1.02 .67
.79 .60
.57 .55
5 WC0060A 2000
.82 .71
.5b .63
.23 .58
2200
.60 .76
.21 .67
- -
2400
.51 .81
- -
Trans factory supplied motors, in commercial equipment are definite purpose motors, specifically designed and tested to
operate reliably and continuously at all cataloged conditions.
Using the full horsepower range of cur fan motors as shown in our tabular data will not resuh in nuisance tripping or premature
nwtor failure. Our product's warranty will not be affocted.
NOTES:
1. Wet coil, with fitters, no heater installed. See pressure drop Table 10 for installed electric heaters.
Fan motor heat (M8h) = 3.5 x Bhp
4
N'
5
Table 10 Static Pressure Drop Through Accessories
(Inches Water Column)
0-25%
Standard' Manual/
Electric Heat
Unit 1" Motorized
Economizer
Accessory (KW)'
Tons Model No. CFM Fitters OA2
100% RA2 5.8
10.0 -11.5 17.3 15, 20, 23 30
1600 .06 0
.01 .03
.05 .08 .11 .16
5 WCDO60AI 2000 .10 0
.09 .04
.07 .11 .15 .22
2400 .15 0
.14 .05
.09 .14 .19 .28
NOTES:
1. Rounded to nearest 0.1 KW
2. OA = Outside Air, RA = Return Air
Table 11 Unit Wiring With Electric Heat
Standard Indoor Motor
Oversize Indoor Motor
To Use Heater
Heater Control Max Circuit Breaker
Max
Circuit Breaker Single Source
Tons With Model No.
KW Rating' Stages MCA fuse Sae Max HACR CSA
MCA Fuse Size
Max HACR CSA Power Entry
208 -230 Volts Single Phase
BAYHTRB106
4.33 -5.76 1 77 100 100 -
- -
- - BAYSPEK022A
5 WCD06OAl BAYHTR8112
8.63 -11.52 1 107 125 -
- -
- - BAYSPEK025A
BAYHTRB117
12.98 -17.28 2 137 150 -
- -
- - SAYSPEK028A
BAYHTRB123
17.30 -23.04 2 167 175 -
- -
- - BAYSPEK028A
208 -230 Volts Three Phase
BAYHTRB310
7.45 -9.96 1 60 70 70 -
- -
- - BAYSPEK031A
5 WCD060A3 BAYHTRB315
11.25 -14.96 1 75 80 80 -
- -
- - BAYSPEK034A
BAYHTRB320A
14.96 -19.92 1 90 90 90 -
- -
- - BAYSPEK036A
BAYHTR8330
22.44 -29.88 2 120 125 -
- -
- - BAYSPEK037A
460 Volts Three Phase
BAYHTRB410
9.96 1 31 35 -
- -
- BAYSPEK039A
5 WCD06OA4 BAYHTR9415
14.96 1 38 40 -
- -
- BAYSPEK041A
BAYHTR9420
19.96 1 46 50 -
- -
- BAYSPEK043A
BAYHTRB430A
29.68 1 61 70 -
- -
- BAYSPEK044A
575 Volts Three Phase
BAYHTRBW10
9.96 1 23 25 -
- -
- BAYSPEK038A
5 WCDO60AW BAYHTRBW15
14.96 1 30 30 -
- -
- BAYSPEK045A
BAYHTRBW20
19.96 1 36 40 -
- -
- BAYSPEK040A
BAYHTRBW30
29.88 1 48 50 -
- -
- BAYSPEK046A
• = HACR circuit breakers are not available at present
for 46OV, 575V or above 100A @ 240V
NOTES:
1. KW ratings are at 208/240 for 208/230V unit
480V for 460V unit
600V for 576V unit
N'
5
Table 12 Auxiliary Electric Heat Capacity
Total Stage 1 Stage 2
Unit KW MBh No, of KW MBh KW MBh
Tons Model No. Input- Output" Stages Input- Output" Input- Output -
9.96 34.0 1 9.96 34.0 - -
w nc c, , , to or Fl 1
"Does not include indoor fan power or heat
To calculate temp rise at different air flow, use following formula:
NOTES:
Temp. Rise across Elea. Htr =
1. For 460 vott single stapes 29.88 KW, MBh Output 102.0
Voltage /
V 1'
Electric Heater Voltage
2. Heaters are rated at 24N. 480v and 600v. For other than rated voltage, CAP =
g
)' p
x rated ca and KW = t
Rated Voltage
/ x rated KW.
RV
(Applicable to Auxilliary
Table 13
Air Temperature Rise Across
Electric Heaters
Distribution Capacity
Voltage
Voltage Multiplier
5 Ton
240
230 0.92
2000 CFM
240 1.00
Single Phase
Three Phase
KW
Stages
WCD06OAl
WCD06OA3, A4
5.76
1
9.1
-
9.96
1
-
15.7
11.52
1
18.2
-
14.96
1
-
23.6
17.28
2
27.3
-
19.92
1
-
31.5
23.04
2
36.4
-
29.88
2
-
47.2
Minimum design airflow for any heater is 20% above and below nominal.
To calculate temp rise at different air flow, use following formula:
KW x 3413
Temp. Rise across Elea. Htr =
1.08 xCFM
Table 14
Electric Heater Voltage
Correction Factors
(Applicable to Auxilliary
Heat Capacity)
Nominal
Distribution Capacity
Voltage
Voltage Multiplier
208 0.75
240
230 0.92
240 1.00
440 0.84
480
460 0.92
480 1.00
540 0.81
600
575 0.92
600 1.00
Table 15 Electric Heater Temperature Rise Correction Factors
% Variation From Nominal CFM -20 -15 -10 -5 0 +5 +10 +15 +20
Temperature Rise Multiplier 1.25 1.17 1.11 1.05 1.00 0.95 0.91 0.87 0.83
L
Mechanical
Specifications
General
The units shall be dedicated downflow
airf low. All units shall be factory
assembled, piped, internally wired and
fully charged with R -22. Units shall be
UL listed. Canadian units shall be CSA
certified. All units shall be factory run
tested to check cooling operation, fan
and blower rotation and control
sequence. Units shall be designed to
operate at ambient temperatures
between 115 F and 0 F in cooling as
manufactured. Units shall be capable of
low ambient cooling operation to 0
degrees with no additional accessory.
Cooling performance shall be rated in
accordance with ARI standards.
Unit Casing
All components shall be mounted in a
weather - resistant steel cabinet with an
enamel finish. Access panels shall be
provided for unit controls and
compressor, indoor coil and fans.
Indoor air section and compressor
compartment shall be completely
insulated with fireproof, permanent,
odorless glass fiber material. Knockouts
shall be provided for utility and control
connections. Provision for a unit
mounted disconnect shall be standard.
Drain connections shall be provided to
accommodate indoor water runoff,
Lifting holes shall be provided in the
unit base rail.
Compressor
The compressor shall be a hermefically
sealed, high efficiency Trane
compressor. Internal line break
overcurrent and over temperature
protection, low pressure protection,
internal high pressure relief, and
crankcase heaters shall be standard.
Evaporator defrost control shall prevent
compressor slugging by temporarily
interupting compressor operation when
low evaporator coil temperatures are
encountered.
Refrigeration System
All units shall have thermostatic
expansion refrigerant controls. Service
pressure tap ports, and a refrigerant
line filter dryer shall be standard.
Indoor And Outdoor Coils
All coils shall be internally finned 3 /a"
copper tubes, mechanically bonded to
aluminum plate fin as standard.
Evaporator coil leak and pressure tested
to 200 psiq; condenser coil tested to
450 psiq.
Indoor Fan
The indoor fan shall be a forward -
curved, centrifugal -type fan with a
multiple speed, direct drive motor.
Motor is permanently lubricated and
shall have built -in overload protection.
Outdoor Fan
One, direct- drive, statically and
dynamically balanced, 22 inch propeller
fan shall be used in a draw - through
vertical discharge configuration.
Permanently lubricated weatherproof
motors shall have built -in thermal
overload protection.
Defrost Controls
Electronic timed initiated, temperature
terminated defrost system with choice
of 50, 70 or 90 minute cycle. Timed
override limits defrost cycle to 10
minutes.
System Controls
System controls include condenser fan,
evaporator fan and compressor
contactors, and a low voltage control
protects against low coil temperature.
Filters
All units shall be provided with 1"
throwaway filters as standard. Filter
racks have provision for 2" filters.
Accessories
Roof Curb —The roof curb shall be
designed to mate with the unit and
provide support and complete weather -
tight installation when properly
installed. Adhesive back polyurethane
sealing strips shall be provided to
ensure an airtight seal between supply
and return openings of the curb and
unit. The roof curb design allows field
fabricated ductwork or field purchased
concentric supply /return ductwork to
be connected directly to the curb. Curb
ships knocked down for field assembly,
and includes factory- installed wood
nailer strips.
Since The Trane Company has a policy of continuous
product improvement, it reserves the right to change
design and specification without notice.
Technical Literature Printed in USA
The Trane Company
Guthrie Highway
Clarksville, TN 37040
An American Standard Company
Mechanical
Specifications
Electric Heaters — Each heater
assembly shall include power supply
fusing of over 48 amps, automatic
resetting limit switches and heat
limiters for thermal protection. Heaters
shall be provided with polarized plugs
for quick connection to unit low voltage
wiring. 2 -stage heaters shall ship with
one outdoor thermostat (ODT). Electric
heat modules shall be UL approved.
Single Source Power Entry — This
accessory when used with electric heat
accessory shall allow single source
power connection to unit and heater
combination. Single source power entry
kits shall have specific matching
heater(s). Kit shall include high voltage
terminal blocks, fuse blocks and fuses,
cut -to- length interconnecting wiring,
and junction box (if required) to provide
power sources with fuse protection as
required for both the unit and accessory
heater. Kit components shall install
within the unit cabinet in the heater
access section. Single source branch
power circuit shall be protected and
wired in accordance with local codes.
Fully Modulating Downflow
Economizer — This accessory shall be
field installed and be composed of the
following items: 0-100% fresh air
damper, damper drive motor, fixed dry
bulb enthalpy control, and low voltage
polarized plug for electrical
connections. Solid state enthalpy or
differential control is optional.
Economizer operation shall be
controlled by the preset position of the
enthalpy control. A barometric relief
damper shall be standard with the
economizer and provide a pressure
operated damper that shall be gravity
closing and prohibit entrance of outside
air on equipment "off" cycle.
Manual Outside Air Dampers — Rain
hood and screen shall be field installed.
Suitable for up to 25% outside air.
Motorized Outside Air Dampers —
Motorized damper assembly shall
provide up to 25% outside air on
demand from a field - installed control.
Polarized plug shall provide connection
to unit low voltage wiring. Motorized
damper, screen and rain hood shall be
field installed on unit cabinet panel.
Field installed control shall connect to
unit low voltage terminal block.
Coil Guard — Coil guard can be field
installed for condenser coil protection.
Anti -Short Cycle Timer — Timed off
device that ensures a minimum of five
minutes off between compressor
cycles.
Control Options
Standard Indoor Thermostats —
Heating /cooling thermostats shall be
available in either manual or automatic
changeover. Thermostat shall provide
automatic or continuous fan operation
and include outdoor thermistor,
emergency heat switch and indicator
light, and auxiliary heat indicator light.
Programmable Electronic Night
Setback Thermostat — Programmable
electronic thermostat shall provide
heating setback and cooling setup with
7 -day programming capability. 1 H/1 C
or 2H /2C models available.
Library
Product Literature
Product Section
Unitary
Product
Packaged Heat Pump
Model
WCD060A — 5 Ton
Literature Type
Submittal
Sequence
202.02
Date
March 1991
File No.
P1_- UN- RT- WCD060 -SQ- 202.02 3/91
Supersedes
WCD060 -SQ- 202.01
Alt-Au y-,(M TT / Gvi��y�T ?oo 1-45.
5T Pkg HP
Project: -Untitled1 01/15/2016
Prepared Bv: 09:47AM
5T Pkg HP
Tag Cover Sheet
Unit Report
Certified Drawing
Performance Report
Unit Feature Sheet
Packaged Rooftop Builder 1.39w
0 1 ITS
BY------------ - - - - -- --
Unit Report For 5T Pkg HP
Project: —Untitledl 01/15/2016
Prepared By: 09:47AM
Unit Parameters
Unit Model: _ _ _ 50KCQA06AOA3 -OAOAO
Unit Size: ___ __ _ _ _ 06 (5 Tons)
Volts- Phase - Hertz: . ........ __._.._ . __ _._ 208 -1 -60
Heating Type: _. - ...._ -.._._ .........Heat Pump
Duct Cfg: _ _ _ _ Vertical Supply/ Vertical Return
Standard One -Stage Cooling Refrigeration Coil
W7212 Non -Fault Detection and Diagnostic
Lines and Filters
Return Air Filter Type:_ _ Throwaway
Return Air Filter Quantity:.. _._ ..___... _ _. _ __..._. 4
Return Air Filter Size: __ _ _- ....16 x 16 x 2
Unit Configuration
Standard Static Direct Drive - ECM
AI /Cu - AI /Cu
Base Electromechanical Controls
Standard Packaging
Warranty Information
5 -Year electric heaters (STD.)
1 -Year parts (STD.)
5 -Year Compressor (std.)
No optional warranties were selected.
Dimensions (ft. in.) & Weight (lb.) "
Unit Length: 6' 2.375"
Unit Width: _ _ _ 3' 10.75"
Unit Height: 3' 5.375"
••� Total Operating Weight: _700 lb
Weights and Dimensions are approximate. Weight does
not include unit packaging. Approximate dimensions are
provided primarily for shipping purposes. For exact
dimensions and weights, refer to appropriate product
data catalog.
NOTE: Please see Warranty Catalog 500 -089 for explanation of policies and ordering methods.
Ordering Information
Part Number
Description
Quantity
50KCQA06AOA3 -OAOAO
Rooftop Unit
2
Base Unit
None
Accessories
CRHEATER103B00
6.5/8.0/8.7 kW 208/230/240- 1/3 -60 Volt Electric Heater
4
CRSINGLE041A00
Single Point Kit
2
CRECOMZR067A00
Ultra LOW LEAK - Vertical EconoMi$er X with solid -state W7220
controller
2
Packaged Rooftop Builder 1.39w Page 2 of 9
CL
a�
a.
F-
LO
L.
0
0�
O
(1)
U
oQ
N �
O O
�>
�m
-p
U �
N Q
O N
M*
E-
1'
S
-
zn
-- _ moo.
Y '
r
2
nom-.
V
T L
w
t`
0
a
a�
m
fV
Y
U
m
CL
CL
'I--
V
L-
0
4!
Y
W
4�
�j
/W
V
oQ
N ~
t!7
O
O
M
C ?
� m
U @
� Q
O N
d
M
_ N
O
O
„gam v
Y
•.F
V
V
_ Z
O a
�oS c1 F-
Z ¢
N Z
tp
- O
O
O
Y
0
.n
m V
K
O V
O
O
° O
O
EMU
M111111/llllllllUU
Imm
EMMEM o
e O
0
o e �
O
_ p
io
d
Z
�
�
CL
I--
�
Q
�
E
.%
@
D
�
.�
�
%
�
e>
\%
\\
CD
§
//
!. \
kE
eR
m=
\4«
{$)
)
o
\
\}
� }
\}
\
\ . 22 • ~
�
-
\
{[
§
§l�K2l
/ z `
«m
-±2)#
§{�la�7
\
)
§
{ I
e
®
{ {£;
�
kt
)
z
_
)(
u�
{{
w
!®
(
\4«
{$)
)
\
\}
� }
\}
§l�K2l
:
«m
-±2)#
§{�la�7
)
§
{ I
e
e {T_£y
�,�,ee,��w
{ {£;
�
Performance Summary For 5T Pkg HP
Project: — Untitled1 01/15/2016
Prepared By: 09:47AM
Part Number:50KCQA06AOA3 -OAOAO
ARI SEER: _ .......... _...._ _ 14.30
Base Unit Dimensions
Unit Length: _ .... ------- - - - - -- _
.._. - 74.4 in
UnitWidth: _...._.......... .__.............................. ._........... .........._..._.......__.. _......_.._._..........._._.... _ .................._.._-
_ _ -------- .......... 6.8 in
Unit Height:_ __. ........................................... 1........_.._..-
__. _ 41.4 in
Operating Weight
------------------------------ ----------------------------------------------- Direct
BaseUnit Weight. .................... . _ .... -. .._ ............... _ .........................._... ....
....._. 610 lb
Accessories
--------- ....................... _..._........... ............................. ._ ___ 0 ft
6.5/8.0/8.7 kW 208/230/240- 1/3 -60 Volt Electric Heater:_ _ ____ _ .... ...._............_..._.........
30 lb
Single Point Kit: _ _
_......___ 10 lb
Ultra LOW LEAK - Vertical EconoMi$er X with solid -state W7220 controller: __...._.._ .... _. ..........
.............__. __.__50 lb
Total Operating Weight: __ _ _._.:_:,.
700 lb
Unit
Unit Voltage-Phase-Hertz:.... _._ ................
_.....__.. _ _ 208 -1 -60
AirDischarge: _ .................._..... .....___- ------- _-- _................ ......... ..... - - -
........... ..........._... ...... -- - .................... Vertical
FanDrive Type: _ - ------ _ ............. .. - ......._........._._ ..........................
------------------------------ ----------------------------------------------- Direct
ActualAirflow: - ........ --------------------------- ._ ..................
...................... ............................................................ 1856 CFM
SiteAltitude: ................ ................. .------------- ..-._........
--------- ....................... _..._........... ............................. ._ ___ 0 ft
Cooling Performance
CondenserEntering Air DB: - .._........... ........... .......................... .._ ..............
..................... -- - - - - -- .........._ 95.0
F
EvaporatorEntering Air DB: _....._ ................. ..._.... ___ .... ----- ......................................................................
____ ...._......._.._. -- 80.0
F
EvaporatorEntering Air WB: ..... ....... ............... ..... ....... ....... _ ............ .... ..................
_...._..................... ......................_........ 67.0
F
Entering Air Enthalpy:
. ......... 31.44
BTU /Ib
Evaporator Leaving Air DB: _ _ _ ........................_.................._.......... .._......__........_.._..._..._
......... 58.6
F
Evaporator Leaving Air WB: .... .............___......__....... -- --....._...................
...._.................._..... -.
kW
Evaporator Leaving Air Enthalpy: ...... .... .- --- ..._..._.. __._..... ......
.......... ...... ........ .............................. 24.57
BTU /Ib
Gross Cooling Capacity: ___. ...-__._..---.-_......... ................ ...............
.. _57.37
MBH
Gross Sensible Capacity: _ .. ................... .
.........42.95
MBH
Compressor Power Input: _........._........._ .. ...........__......_.__._....__
......... _ ..... _ ............................. ..._ ......... - -- 4.77
kW
Coil Bypass Factor: _ _.__...._......__ ............. _ .... ....... ............_........._..._.
0.108
Heating Performance
Outdoor Ambient Temperature:_ _ - ___............. ...__._......_._.._..__.__..._....._.._...._..
........................... _........ _ ___ _ _ 47.0
F
Entering Air Indoor Coil DB: _ --................... ...... ..._....._...._...... .... _.. .........
_... ..... ...__ ............................... 70.0
F
LeavingAir Indoor Coil DB:. ___ ................ _ _ .................. ........ ..... --..........._._....---------
......_.................... ...........................97.6
F
Total Heating Capacity: _.
_._._ 55.35
MBH
Integrated Heating Capacity:
55.35
MBH
Heating Power Input:..... - __._....__ .._............................
_ .. ....... ............. ............4.11
kW
HSPF: _ _ _. - ...................
._ ................. ......_......................._ 8.2
BHP
ElectricHeating Capacity:, ........... ... _ .............................................................................
._........._.........._._._ 13.10
kW
Unit Leaving Air Temp: _._.. _ . __
...._ ........................_ 119.9
F
Supply Fan
External Static Pressure: _
_ _ _ .. _.... 0.50
in wg
Options / Accessories Static Pressure
Electric Heaters: ... - ........ - .._. ......._..._ ................. ... _
................ ... ____ ........... .. -. ..0.17
in wg
Economizer: ........ ....._._ .
....................... ...........................0.10
in wg
Total Application Static (ESP + Unit Opts /Acc.): ___
_ _. -- - --- ............... ............................... 0.77
in wg
Fan RPM: _.. _..___
_._...-.1200
Fan Power: __.._ _
1.00
BHP
Fan Motor Size, hp:
NOTE:_
Motor Speed Tap 4, Vert, Direct Drive
Electrical Data
Packaged Rooftop Builder 1.39w Page 6 of 9
Performance Summary For 5T Pkg HP
Project: —Untitledl 01/15/2016
Prepared By: 09:47AM
Voltage Range:
_._ _ 187-253
Compressor #1 RLA:
...... 23.7
Compressor #1 LRA:_
__ 153
Actual Electric Heater kW:
...................... _ 13.1
Electric Heater FLA: _ .....
_.._...__..... 62.8
OutdoorFan Motor Qty: _. . ................ ........... _ _ ............ ............................................................
66.6
OutdoorFan FLA (ea):._ - ...._ ........ .................. ............_.............. ...............................
........................._ . _......... .. 1.4
IndoorFan Motor Type: ...... ................... ....._............................................ ...................................................
_ . .........................Direct Drive
IndoorFan Motor FLA: ............. ._.................................................. - ......._......_....................
_ .................................... _. ...... .... ........ _ 7.4
PowerSupply MCA: .. - -- -- ...... _. ...................... _- ..__..._ ............. . ......
.................................... .................. - -- 117
Power Supply MOCP (Fuse or HACR):._ ...................... ..........._._._._......_......_._...
._..............._.._.....__... - - - ..................... 125
DisconnectSize FLA: _ ............ .............................. ............................ ......._..
-._......._--........ ....._......................... ......................110
DisconnectSize LRA: _ ...... .._ ............................................... ......................... ......_...
..... _._. ............... ...- ...._............................. 289
ElectricalConvenience Outlet:... _ .............................................. --------------- ----------------
...................................................... . None
Electric Heater Number of Stages: ... .... ......... ............... ....................................................
_........_ ._.....------------------ ...... 2
Control Panel SCCR: 5kA RMS at Rated Symmetrical Voltage
Acoustics
A_Weighted: _. _....... ...._.. _..._ 79.0 db
Sound Power Levels, db re 10E -12 Watts
Advanced Acoustics
Advanced Accoustics Parameters
Discharge
Inlet
Outdoor
63 Hz
NA
NA
57.7
125 Hz
NA
NA
66.6
250 Hz
NA
NA
68.7
500 Hz
NA
NA
72.9
1000 Hz
NA
NA
74.5
2000 Hz
NA
NA
71.1
4000 Hz
NA
NA
67.6
8000 Hz
NA
NA
62.6
Advanced Acoustics
Advanced Accoustics Parameters
1. Unit height above ground: _ _.__......_.. _...._... _ _
_ 30.0 ft
2. Horizontal distance from unit to receiver:.._ .........
50.0 ft
3. Receiver height above ground: ......................... ..........._..5.7
ft
4. Height of obstruction: _. _...
_0.0 ft
5. Horizontal distance from obstruction to receiver:
...0.0 ft
6. Horizontal distance from unit to obstruction:__
_ 0.0 ft
Detailed Acoustics Information
Octave Band Center Freq. Hz 1 63 1125 1250 1500 1 1 k 2k I 4k I 8k I Overall
Packaged Rooftop Builder 1.39w Page 7 of 9
Performance Summary For 5T Pkg HP
Project: -Untitled1 01/15/2016
Prepared By: 09:47AM
A
57.7
66.6
68.7
72.9
74.5
71.1
67.6
62.6
79.1 Lw
B
31.5
50.5
60.1
69.7
74.5
72.3
68.6
61.5
78.1 LwA
C
25.3
34.2
36.3
40.5
42.1
38.7
35.2
30.2
46.7 L
D
-0.9
18.1
27.7
37.3
42.1
39.9
36.2
29.1
45.7 LpA
Legend
A Sound Power Levels at Unit's Acoustic Center, Lw
B A- Weighted Sound Power Levels at Unit's Acoustic Center, LwA
C Sound Pressure Levels at Specific Distance from Unit, Lp
D A- Weighted Sound Pressure Levels at Specific Distance from Unit, LpA
Calculation methods used in this program are patterned after the ASHRAE Guide; other ASHRAE Publications and the AHRI
Acoustical Standards. While a very significant effort has been made to insure the technical accuracy of this program, it is assumed
that the user is knowledgeable in the art of system sound estimation and is aware of the tolerances involved in real world acoustical
estimation. This program makes certain assumptions as to the dominant sound sources and sound paths which may not always be
appropriate to the real system being estimated. Because of this, no assurances can be offered that this software will always generate
an accurate sound prediction from user supplied input data. If in doubt about the estimation of expected sound levels in a space, an
Acoustical Engineer or a person with sound prediction expertise should be consulted.
Packaged Rooftop Builder 1.39w Page 8 of 9
Unit Feature Sheet for 5T Pkg HP
Project: --Untitled1 01/15/2016
Prepared By __ 09:47AM
i1ff Jff&v "
PACKAGED ROOFTOP HEAT PUMP UNITS - 14 SEER
3t 4,5TONS
WEATHERMAKER SERIES
WeatherMat:er 54KC0 (14 SEER) units are single- packaged
heat pump units that are pre -wired and charged with Puron
(R -410a) refrigerant. The units are factory tested and rated in
accordance with AHRI Standard 2100,40. weatherMaker units
are designed in accordance with UL Standard 1995, and listed
by the Un d erwriters' Laboratories.
u.•�!ne,r ra r �,d_...
Ere �.ctt-sw+.
ma,><aen„res
C u. US
rt arrr•ra r.,v.+. w
Certified to ISO 9€ 01
PERFORMANCE FEATURES
PURON (R-4 10A) RFC refigeasnt
• Meets and exceeds ASHRAE 99.1 energy efficiency ievels
+ SEERs up to 14.4, EERs up to 122, HSPF "s up to 8,0
• Single stage coaling capacity control
• Exclusive non - corrosive composite condensate pan m accordance with
ASHRAE 52 Standard, sloping design; side orcenterdrain
. Coppertube aluminum fm coal✓ with optional corrosion msis".ant co&-
« Piz - painted exc:enof panels and primer coated inter?orpanelstested to
500 hours salt spray protection
+ Acutrol- refrigerant metering system
. Cooling operat.grangeupto 115F(46C)anddown to25F {-4C,
.
Solid-state contra€ board and easy access teninal board
• Refngerant fii ter dr, r and acoumuistoron each refrigerant cicurt
Fully insulated cabinet
• AutomsticchangeoserWhen used with auto -changeover themrua -tat
• Rated in accordance with AHRI Standards 240
+ Loss ofcharge, freeze protection, and high - pressure switches
• Dependable Tine f Tenpersture defrost board and logic
• Listed by UL and UL. Canada
MAINTENANCE FEATURES:
• Accesspanerswith easygrip handles
• innovstive. easy starting, no strip screw festureson unit scoesspanei
• Two -inch disposable return ssfflem
« Tool- lessfdtersocessdoar
. Direct Ltive- ECMindoormotoris standard with optional bet drive
systems
Temiinsi board fac&ating simple safetycircuft troubleshooting and
simplified confraiboxanangement
INSTALLATION FEATURES:
• Thru- thew`othxn pow. rentry capability standard
• Single point electric connections
• Full perimeter base rag with built -in nggang adapter-. and fork track slots
• Field conve2ible from vert✓„atb hor¢onia<e'.e
STANDARD WARRANTY:
• 5- y�srekct-ie heaters
• 5- yearcompresco-
• 1-yesr pads
bfany opticnaiwa�snties also ava€lab3e
OPTIONS INCLUDE BUT ARE NOT LIMITED TO:
• PremlerLirk and RTU Open t,40i Protocol DDC Controls
•
Supply and Return air smoke detectors
Non -fused disconnect switch and convenience outletoptions
• High static motor options
. CO2 sensor
. Cormsonreslstantcol options teuevaporatorandcandenser
• Field aocesso<y efeotrk heat and single point lots (5-idtristaged on3j)
• Hinged access panels
• integrated econom¢ersystem. Standard and Ultta Love Leak versions
For a complete fist of options and the Product Data
Catalog forthis unit.
Rooftop Builder 1.39w Page 9 of 9
City of Yelm
Community Development Department
Building Division
Phone: (360) 458 -8407
Fax: (360) 458 -3144
Applicant:
Name: MR. DOUG'S FAMILY RESTAURANT
Address: PO BOX 698
YELM WA 98597
Property Information:
Site Address: 201 103RD
Assessor Parcel No.: 22730110202
Contractor Information:
Name: SOUND HEATING & AC
Address: CURTIS HOOD
5526 184TH ST. E, STE. A
PUYALLUP WA 98375
Contractor License No.: 10696
Project Information:
Project: MECHANICAL
Description of Work:
Sq. Ft. per floor:
First
Second
Third
Garage
Basement
Fees:
Permit No.: 20160149
Issue Date: 3/10/2016
(Work must be completed within 180 days)
Phone: 360 - 458 -2255
Owner: TRACY WOOD
Subdivision: Lot:
Phone:
Expires: 12/31/2015
Heat Type (Electric, Gas, Other):
Item Contractor
MECHANICAL SOUND HEATING & AC
PLUMBING WASHINGTON ENERGY SERVICES - 03/11/2016
TOTAL FEES:
Applican s Affidavit:
I certify t at I have read and examined the information contained within the application and know the same
to be tru and correct. I also certify that the proposed structure is in conformity with all applicable City of
Yelm re ulations in those governing zoning and land subdivision, and in addition, all covenants,
easeme is and r triction of record. If applying as a contractor, I further certify that I am currently
registere in the to of&ashin gton.
t
Signature Date
Firm
Fees
$ 46.50
$ 32.00
$ 78.50
OFFICIAL USE ONLY
# Sets of Prints:
Final Inspection:
Date:
By:
City of Ni
(36 ) 458 -3244
REC #: 00225138 3/11/2016 3 :41 PM
OPER: CO TERM: 001
REF #: 3101
PAID BY:
TRAN: 33.0000 BUILDING PERMITS
20160149 32.000R
MR. DOUG'S FAMILY RESTAURANT
201 103RD
PL 32.00CR
TENDERED: 32.00 CHECK
APPLIED: 32.00-
CHANGE: 0.00
�IlooIy°I
CITY OF YELM
COMMERCIAL BUILDING PERMIT APPLICATION FORM
Project Address: 210 103RD AVE SE
Zoning;
New Construction
Plumbing Mechanical
Current Use:
Parcel #: 22730110202
Proposed Use:
Re -Model / Re -Roof / Tenant Improvement
Fire Prevent/Suppress /Alarm Other
Project Description /.Scope of Work: REPLACE GA WATER HEATER
Project Value: 4900.00
Building Area (sq. ft) Parking Garage 151 Floor 2nd Floor 3rd Floor
Building Height
Are there any environmentally sensitive areas located on the parcel? If yes, a
completed environmental checklist must accompany permit application.
PLUMBING CONTRACTOR TELEPHONE
ADDRESS EMAIL
CITY STATE ZIP FAX
CONTRACTOR'S LICENSE # EXP DATE CITY LICENSE #
MECHANICAL CONTRACTOR TELEPHONE
ADDRESS EMAIL
CITY STATE ZIP FAX
CONTRACTOR'S LICENSE # EXP DATE CITY LICENSE #
Copy of City Mitigation documentation (TFC).
I hereby certify that the above information is correct and that the construction on, and the occupancy and the use of the
above described property will be in accordance with the laws, rules and regulations of the State of Washington and the
City of Yelm.
03/07/2016
Applicant's Signature Date
Owner / Contractor / Owner's Agent / Contractor's Agent / Tenant (Please circle one.)
All permits are non - transferable and will expire if work authorized by such permit is not begun
within 180 days of issuance, or if work is suspended or abandon D f,Qr a-period of 180 days
2016
b Y: (360) 458 -3835
105 Yelm Ave W (3605 4rf9317TrAX
Yelm, WA 98597 [uww.ci.yelm.wa.us
Karen Bennett
From: Jennifer Covello [Jennifer @nwpermit.coml
Sent: Monday, March 07, 2016 9:46 AM
To: Karen Bennett
Subject: WESCO APP
Attachments: YELM COMMERCIAL NEW 210 103RD AVE SE.pdf
Good Morning,
Please process this application. Please let me know what the fees are so we can mail a check.
Have a wonderful day!
Thank you,
Jennifer Covello
Regional Account Manager
Direct: (206) 774 -9499 - jennifer@nwpermit.com
NORTHWEST PERMIT INC - Permits In line, On line, In time. Since 1985
9808 31st Ave SE, Everett WA 98208
Main: (360) 945 -2787 - Fax: (888) 400 -0383 - www.nwpermit.com
;vv,';.n4perm,t.c0m
Please find enclosed a check for the site address below, please process
and mail permits to:
Northwest Permit
9808 31s' Ave S.E.
Everett, WA. 98208
SITE ADDRESS: 210 103RD AVE SE
AMOUNT: $32.00
PERMIT: #20160149
Also, if you could please update your records with our new mailing
address listed above; and if you have any questions or concerns please
contact Dy Sconzo of Northwest Permit at (360)945 -2787.
9808 31 � Ave S.E. Everett, WA. 98208
Phone: (360) 945 -2787 • Fax: (888) 400 -0383 • www.nwpernnit.com